# KEBA

> Symcon documentation · English · generated on 2026-09-26  
> Index: https://www.symcon.de/en/llms.txt

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/keba/

KEBA offers various wallboxes/charging stations. These can be read out via ModBus RTU/TCP. A connection with IP-Symcon is possible via LAN or RS485, depending on the version.

> **Note:** The following devices are supported by IP-Symcon:
>
> [Supported components](keba.md)

### Installation
In order to be able to use KEBA wallboxes/charging stations in IP-Symcon, a connection via Ethernet or RS485 to the wallbox must be available.

### IP-Symcon integration
First, a "ModBus Device" instance must be added within the IP-Symcon object tree. The DeviceID must be set to 255 and the IP address of the wallbox must be entered in the following dialog. The port is 502 by default. Both pieces of information can be viewed on the web interface/app of the WallBox/charging pole.

![KEBA Client Socket Configuration.: imageblock](https://www.symcon.de/media/pages/service/dokumentation/modulreferenz/geraete/keba/a0c67a7345-1790424938/keba-clientsocketconfig.png)
![KEBA Gateway configuration.: imageblock](https://www.symcon.de/media/pages/service/dokumentation/modulreferenz/geraete/keba/26dbc2e921-1790424938/keba-gatewayconfig.png)

The ModBus template for KEBA wallboxes/charging stations can then be downloaded. This contains the entire configuration of the ModBus device. After downloading, the "KebaModBus_vx.json" can be loaded via "Import". All ModBus addresses of the common KEBA wallboxes/charging stations are then set up.

> **Note:** ModBus template for KEBA wallboxes/charging stations: [Download](https://www.symcon.de/media/pages/service/dokumentation/modulreferenz/geraete/keba/95f894dbf9-1790424938/kebamodbus_v1.json)

![KEBA after loaded config: imageblock](https://www.symcon.de/media/pages/service/dokumentation/modulreferenz/geraete/keba/b261a30a97-1790424938/keba-device.png)

### Add addresses

If further addresses are to be added, this can be done via "Add".
Depending on the wallbox version, individual addresses may need to be deactivated/activated. This can be controlled via the Active column.

### protocol description

> **Note:** Protocol description for KEBA wallboxes/charging stations:
> * KEBA KeContact P30: [Download](https://www.symcon.de/media/pages/service/dokumentation/modulreferenz/geraete/keba/dafc7da7e7-1790424938/keba-p30-wallbox-modbus.pdf)
> * KEBA KeContact P40: [Download](https://www.symcon.de/media/pages/service/dokumentation/modulreferenz/geraete/keba/8ad234ed8e-1790424938/keba-p40-wallbox-modbus.pdf)

## Device List

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/keba/device-list/

_Requires Symcon >= 7.0_

### Supported components

| System             | Model                 | Description               |
| ------------------ | --------------------- | ------------------------- |
| KEBA KeContact P30 | All, without a-series | Supported in all versions |
| KEBA KeContact P40 | All                   | Supported in all versions |