# Z-Wave

> Symcon documentation · English · generated on 2026-09-26  
> Index: https://www.symcon.de/en/llms.txt

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/

Z-Wave is a wireless system used by several manufacturers. Either a [LAN or USB gateway](z-wave.md)  is required to connect to IP-Symcon.

> **Note:** The following devices are supported by IP-Symcon:
>
> [__Supported devices__](z-wave.md)

### Integration in IP-Symcon
When using the LAN gateway, this can be integrated via the [Device Search](../components/management-console.md). For this purpose, "Z-Wave Discovery" must be selected as the system. The Discovery instance then offers to create a Z-Wave [configurator](../concepts.md). After the configurator has been created, the individual devices can be integrated there as described below.
If a Z-Wave Configurator is to be created manually, "Z-Wave Configurator" can be searched for in the "Add instance" dialog.

After setting up a Z-Wave configurator, the next step is to teach-in devices.

> **Warning:** Care must be taken to select the [matching gateway](z-wave.md) , the matching client socket (default port: 5000) or Serial Port is set up and configured

This is done within the configurator by pressing the "Add device" key and then pressing the teach-in key of the device at least three times in quick succession.
IP-Symcon automatically finds the device and shows this green in the list.
When this is selected and the "Create" button is pressed, IP-Symcon creates an instance of the device, which can then be configured.
The configuration window of the instance can be opened via "Configure" in the Z-Wave Configurator or in the object tree by double-clicking on the instance.
The properties ([Command classes see device list](z-wave.md) ) of the device can be displayed under "Show" after "Loading". Status variables are added automatically and can be checked in the object tree.

> **Note:** To grant IP-Symcon access to certain functions (e.g. Z-Wave device database) from the outside it may be necessary to set them up in the firewall. Further information can be found under [Firewall](../getting-started.md).

### Setup Video-Tutoria[Video](https://www.youtube.com/embed/7jFMxEpCGxU?rel=0&cc_load_policy=1)

### Special equipment - Setup

[link to forum post](https://community.symcon.de/t/einrichtung-und-beschreibung-von-z-wave-geraeten/19688)

## Device list

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/device-list/

### Supported Gateways

| Product                                                                                                             | Description                         |
| ------------------------------------------------------------------------------------------------------------------- | ----------------------------------- |
| Symcon Z-Wave-Plus LAN Gateway | [Product information](https://www.symcon.de/assets/files/product/z-wave-lan-gateway.pdf) | IP Gateway                          |
| 300ZW-US-W                                                                                                          | TrickleStar USB Stick               |
| AEO_USB                                                                                                             | USB stick from Aeon Labs            |
| ZW090                                                                                                               | USB Z-Stick from Aeotec             |
| RaZberry                                                                                                            | Z-Wave Transceiver for Rasperrry PI |
| VIS_ZU1401                                                                                                          | Vision USB stick                    |
| ZME_Serial                                                                                                          | Serial adapter plate                |
| ZME_UZB1                                                                                                            | USB stick                           |
| ZME_ZSTICKC                                                                                                         | Z-Wave.Me USB stick                 |

### Devices

All listed command classes are supported by IP-Symcon. In addition, we offer a list of devices which have been successfully tested by us or our customers.

On [request](https://www.symcon.de/en/contact-us/)  we will be happy to check other devices that are not listed for their compatibility.

### Supported Command Classes

Each Z-Wave device has different Command classes. These classes indicate which functions are supported by the respective device. In IP-Symcon, all functions are available with the following listed command classes.

| Command Class              | Class Version | IP-Symcon Version         |
| -------------------------- | ------------- | ------------------------- |
| ALARM                      | ------------- | Replaced by NOTIFICATION  |
| ASSOCIATION                | 2             |                           |
| ASSOCIATION_GRP_INFO       | 2             | since 5.1                 |
| BASIC                      | 2             |                           |
| BASIC_WINDOW_COVERING      | 1             |                           |
| BATTERY                    | 1             |                           |
| CENTRAL_SCENE              | 1             | since 4.1                 |
| CLOCK                      | 1             |                           |
| COLOR                      | 1             | since 4.1                 |
| CONFIGURATION              | 1             |                           |
| CRC_16                     | 1             |                           |
| DOOR_LOCK                  | 2             | since 4.1                 |
| LOCK                       | 2             |                           |
| MANUFACTURER_SPECIFIC      | 2             |                           |
| METER                      | 5             |                           |
| MULTI_CHANNEL              | 4             |                           |
| MULTI_CHANNEL_ASSOCIATION  | 3             | since 5.1                 |
| MULTI_CMD                  | 1             |                           |
| MULTI_INSTANCE             | ------------- | Replaced by MULTI_CHANNEL |
| NOTIFICATION               | 8             | since 4.3                 |
| PROTECTION                 | 2             |                           |
| SCENE_ACTIVATION           | 1             | since 4.1                 |
| SECURITY                   | 1             | since 4.1                 |
| SENSOR_ALARM               | 1             |                           |
| SENSOR_BINARY              | 2             |                           |
| SENSOR_MULTILEVEL          | 11            |                           |
| SWITCH_ALL                 | 1             | since 4.1                 |
| SWITCH_BINARY              | 2             |                           |
| SWITCH_MULTILEVEL          | 4             |                           |
| SWITCH_SHUTTER             | 1             |                           |
| THERMOSTAT_FAN_MODE        | 1             |                           |
| THERMOSTAT_FAN_STATE       | 1             |                           |
| THERMOSTAT_MODE            | 1             |                           |
| THERMOSTAT_OPERATING_STATE | 1             |                           |
| THERMOSTAT_SETPOINT        | 1             |                           |
| TIME                       | 2             | since 4.1                 |
| USER_CODE                  | 1             | since 4.1                 |
| Unknown                    | 1             |                           |
| VERSION                    | 2             |                           |
| WAKE_UP                    | 2             |                           |
| ZWAVEPLUS_INFO             | 2             | since 5.1                 |
### Tested components
sorted by alphabet

#### ACT
| Product | Description                      |
| ------- | -------------------------------- |
| ZRM230  | Wall Switch/Transmitter (2-gang) |
| ZTM230  | RF Wall Transmitter (2-gang)     |

#### Aeon Labs
| Product        | Description               |
| -------------- | ------------------------- |
| AEO_DSC20-EU   | Door/Window Sensor        |
| AEO_DSB54      | Recessed Door Sensor      |
| AEO_DSD31      | Siren                     |
| AEO_EXTENDER   | Extender                  |
| AEO-HEM2, HEM3 | Clamp Meter 40            |
| AEO_KFOB       | Key Fob                   |
| AEO-MEI        | Micro Dimmer              |
| AEO-MES        | Micro Switch              |
| AEO-MSEI       | Micro Smart Energy Dimmer |
| AEO-MSES       | Micro Smart Energy Switch |
| AEO_MULTISENS  | Multisensor               |
| AEO-SES3       | Smart Energy Switch 3     |
| AEO_ZW088      | Key Fob Gen 5             |
| AEO_ZW089      | Recessed Doorsensor       |
| DSD31          | Outlet Plugable Siren     |

#### AeoTec
| Product | Description                                  |
| ------- | -------------------------------------------- |
| ZW078   | Heavy Duty Smart Switch                      |
| ZW080   | Siren 5                                      |
| ZW095   | Home Energy Meter                            |
| ZW096   | Smart Switch 6                               |
| ZW100   | MultiSensor 6                                |
| ZW111   | Nano Dimmer                                  |
| ZW112   | Door/Window Sensor 6                         |
| ZW116   | Nano Switch with Power Metering              |
| ZW117   | Range Extender 6                             |
| ZW120   | Door​/​Window Sensor Gen5 with Tamper Sensor |
| ZW121   | LED Strip                                    |
| ZW122   | Water Sensor 6                               |
| ZW129   | WallMote                                     |
| ZW130   | WallMote Quad                                |
| ZW132   | Dual Nano Switch with Power Metering         |
| ZW139   | Nano Switch                                  |
| ZW140   | Dual Nano Switch                             |
| ZW141   | Nano Shutter                                 |
| ZW158   | WallSwipe                                    |
| ZW160   | Water Sensor 6 Dock                          |
| ZW162   | Doorbell 6                                   |
| ZW166   | Button                                       |
| ZW164   | Siren 6                                      |
| ZW175   | Smart Switch 7                               |
| ZW189   | Range Extender 7                             |
| ZWA001  | LED Bulb 6 Multi-White                       |
| ZWA002  | LED Bulb 6 Multi-Colour                      |
| ZWA003  | NanoMote Quad                                |
| ZWA004  | NanoMote One                                 |
| ZWA005  | TriSensor                                    |
| ZWA006  | Smart Boost Timer Switch                     |
| ZWA008  | Door/Window Sensor 7                         |

#### Danfoss
| Product                 | Description               |
| ----------------------- | ------------------------- |
| DAN_LC-13 (014G0013)    | Thermostat Radiator Valve |
| DAN_LIVC_RAK (014G0012) | Thermostat Radiator Valve |
#### Everspring
| Product   | Description                       |
| --------- | --------------------------------- |
| EVR_AD142 | Dimmer Plug                       |
| EVR_AN145 | Screw-In Lamp Holder              |
| EVR_AN157 | On/Off Plug                       |
| EVR_AN158 | On/Off Plug with power meter      |
| EVR_HSM02 | Door/Window Detector              |
| EVR_HSP02 | Motion Detector                   |
| EVR_SE812 | Siren                             |
| EVR_SF812 | Smoke Detector with Alarm         |
| EVR_SP103 | Motion Sensor                     |
| EVR_SP814 | Motion Detector                   |
| EVR_ST812 | Flood Sensor                      |
| EVR_ST814 | Temperature & Humidity Sensor |
#### Fibaro
| Product                            | Description             |
| ---------------------------------- | ----------------------- |
| FGBS-001                           | Universal Binary Sensor |
| FGD-211                            | Universal Dimmer        |
| FGFS-101                           | Flood Sensor            |
| FGK 101-107 Door/Window Sensor 2.5 | Door/Window Sensor      |
| FGK-001                            | Door/Window Sensor      |
| FGMS-001                           | Motion Sensor           |
| FGRGB-101                          | RGBW Controller         |
| FGRGBWM-441                        | RGBW Controller         |
| FGRM-222                           | Roller Shutter 2        |
| FGS-211                            | 1x3KW Relay             |
| FGS-221                            | 2x1.5KW Relay           |
| FGSS-001                           | Smoke Sensor            |
| FGSS-101                           | Smoke Sensor            |
| FGWPE/F-101                        | Wall Plug               |
#### NorthQ
| Product                       | Description                    |
| ----------------------------- | ------------------------------ |
| Energy Guard Electrical Meter | Meter (incomplete support)     |
| Energy Guard Gas Meter        | Gas Meter (incomplete support) |
#### Philio
| Product                     | Description                                                    |
| --------------------------- | -------------------------------------------------------------- |
| In Wall Dual Relay (1 Way)  | 230VAC powered static controller with binary switch capability |
| In Wall Dual Relay(1 Way)   | In-wall switch module                                          |
| In Wall Dual Relay(1 Way)   | In-wall dual relay switch module                               |
| In Wall Single Relay(1 way) | In-wall switch module                                          |
| PAN04                       | 2 x 1.5Kw Relay with Power Measurement                         |
| PAN06                       | 2 x 1.5Kw Relay                                                |
| PAN08                       | In-Wall Roller Shutter Controller                              |
| PAN11-1                     | Plugin Switch with meter functionality PAN11-1                 |
| PAT02-1A                    | Flood multisensor (flood, temperature and humidity)            |
| PSE02                       | Wireless multiple sound siren                                  |
| PSG01                       | Smoke Sensor                                                   |
| PSM01                       | 3-in-1 Sensor (Door, Light, Temp)                              |
| PSM02                       | 4-in-1 Sensor (PIR, Door, Light, Temp)                         |
| PSM02-1                     | PIR, door/window, temperature and illumination Sensor          |
| PSP01                       | 3-in-1 Sensor (PIR, Light, Temp)                               |
| PSR03                       | Remote                                                         |
| PST02                       | Slim Multisensor                                               |
#### Polycontrol
| Product         | Description      |
| --------------- | ---------------- |
| Danalock Circle | Z-Wave Door Lock |
| Danalock Square | Z-Wave Door Lock |
#### Popp
| Product       | Description                    |
| ------------- | ------------------------------ |
| POP_004308    | Smoke Detector and Temp Sensor |
| POP_123610    | Plug-in Switch                 |
| POP_123658    | Plug-in Switch with Meter      |
| POP_123665-58 | Wall Plug Switch/Meter         |
| POP_123xxx    | On/Off Plug                    |
| POP_123xxx    | Dimmer Plug                    |
#### Vision
| Product           | Description                                                   |
| ----------------- | ------------------------------------------------------------- |
| PIR Sensor        | PIR Motion Sensor                                             |
| Plugin ON/OFF     | Light Relay                                                   |
| Power Monitor     | Power Monitor                                                 |
| VIS_ZD2102EU 2013 | Door Window Sensor with external digital input                |
| VIS_ZD3102EU 2013 | Motion detector with Temperature sensor and temper protection |
| VIS_ZG8101        | Garage Door Detector                                          |
| VIS_ZL7432        | In-Wall Dual Relay Switch                                     |
| VIS_ZM1601        | Siren (Battery)                                               |
| VIS_ZM1602        | Siren (Mains)                                                 |
| VIS_ZS5102        | Shock & Vibration Sensor                                  |
| VIS_ZS6101        | Smoke Detector                                                |
| VIS_ZS6301        | CO Detector                                                   |
#### Zipato
| Product                 | Description                   |
| ----------------------- | ----------------------------- |
| Mini Keypad RFID/Z-Wave | Mini Keypad with RFID support |
| RGBW bulb               | RGBW Bulb                     |
#### Z-Wave.ME
| Product                  | Description                                                    |
| ------------------------ | -------------------------------------------------------------- |
| Mini remote control KFOB | Mini remote control 4 buttons Z-Wave KFOB, Version 2 Z-WAVE.ME |
#### Other
| Manufacturer    | Product  | Description                                        |
| --------------- | -------- | -------------------------------------------------- |
| Express Control | EZMotion | Motion detector, luminosity and temperature sensor |

> **Warning:** The following are the currently definitely unsupported devices

### Non-supported components
sorted by alphabet

#### Merten
| Product | Description                                                                   |
| ------- | ----------------------------------------------------------------------------- |
| All     | Almost all Merten products cannot be addressed via the normal Z-Wave standard |

## ZW_Basic

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-basic/

`bool ZW_Basic(int $InstanceID, int $Value)`

**Parameters**

- `$InstanceID` (int): ID of the device
- `$Value` (int): 0..255

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

0..255

**Example**

```php
ZW_Basic(12345, 255); //z.B. Turn on
```

## ZW_ColorCW

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-colorcw/

`bool ZW_ColorCW(int $InstanceID, int $ColdWhite)`

_Requires Symcon >= 5.4_

sets the cold-white channel of a RGBWW Z-Wave device

**Parameters**

- `$InstanceID` (int): Device ID
- `$ColdWhite` (int): ColdWhite intensity from 0..255

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

ColdWhite intensity from 0..255

**Example**

```php
// Set ColdWhite to 50%
ZW_ColorCW(12345, 128);
```

## ZW_ColorRGB

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-colorrgb/

`bool ZW_ColorRGB(int $InstanceID, int $Red, int $Green, int $Blue)`

_Requires Symcon >= 5.4_

sets the color of a Z-Wave device

**Parameters**

- `$InstanceID` (int): Device ID
- `$Red` (int): Red Intensity from 0..255
- `$Green` (int): Green Intensity from 0..255
- `$Blue` (int): Blue Intensity from 0..255

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

Blue Intensity from 0..255

**Example**

```php
// Set dark red
ZW_ColorRGB(12345, 255, 0, 0);
```

## ZW_ColorRGBWW

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-colorrgbww/

`bool ZW_ColorRGBWW(int $InstanceID, int $Red, int $Green, int $Blue, int $WarmWhite, int $ColdWhite)`

_Requires Symcon >= 4.1_

sets the colors and intensity of an RGBWW Z-Wave device

**Parameters**

- `$InstanceID` (int): Device ID
- `$Red` (int): Red intensity from 0..255
- `$Green` (int): Green intensity from 0..255
- `$Blue` (int): Blue intensity from 0..255
- `$WarmWhite` (int): WarmWhite Intensity from 0..255
- `$ColdWhite` (int): ColdWhite intensity from 0..255

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

ColdWhite intensity from 0..255

**Example**

```php
// Set dark red
ZW_ColorRGBWW(12345, 255, 0, 0, 0, 50);

// Set warm white
ZW_ColorRGBWW(12345, 0, 0, 0, 255, 0);
```

## ZW_ColorWW

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-colorww/

`bool ZW_ColorWW(int $InstanceID, int $WarmWhite)`

_Requires Symcon >= 4.1_

sets the WarmWhite channel of a Z-Wave device

**Parameters**

- `$InstanceID` (int): Device ID
- `$WarmWhite` (int): WarmWhite Intensity from 0..255

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

WarmWhite Intensity from 0..255

**Example**

```php
// Set WarmWhite to 50%
ZW_ColorWW(12345, 128);
```

## ZW_DimDown

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-dimdown/

`bool ZW_DimDown(int $InstanceID)`

**Parameters**

- `$InstanceID` (int): ID of the device to be switched

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

ID of the device to be switched

**Example**

```php
//The device with the ID 12345 starts to dim down
ZW_DimDown(12345);
```

## ZW_DimDownEx

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-dimdownex/

`bool ZW_DimDownEx(int $InstanceID, int $Duration)`

starts dimming down with a runtime

**Parameters**

- `$InstanceID` (int): ID of the device to be switched
- `$Duration` (int): Running time until dimming down completely (0..255) (see table)

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

Running time until dimming down completely (0..255) (see table)

**Example**

```php
//The device with ID 12345 begins to dim down over a runtime of 10 minutes
ZW_DimDownEx(12345, 138);

//The device with the ID 12345 begins to dim down over a period of 5 seconds
ZW_DimDownEx(12345, 5);
```

## ZW_DimSet

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-dimset/

`bool ZW_DimSet(int $InstanceID, int $Intensity)`

dims a Z-Wave device to a specific level

**Parameters**

- `$InstanceID` (int): ID of the device to be switched
- `$Intensity` (int): Value from 0-100 (in %)

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

Value from 0-100 (in %)

**Example**

```php
ZW_DimSet(12345, 50); //Dimming to 50%
```

## ZW_DimSetEx

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-dimsetex/

`bool ZW_DimSetEx(int $InstanceID, int $Intensity, int $Duration)`

dims a Z-Wave device to a specific level within a runtime

**Parameters**

- `$InstanceID` (int): ID of the device to be switched
- `$Intensity` (int): Value from 0-100 (in %)
- `$Duration` (int): Runtime until the intensity is reached (0..255) (see table)

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

Runtime until the intensity is reached (0..255) (see table)

**Example**

```php
//Dims the device with ID 12345 to 50% in 10 minutes
ZW_DimSetEx(12345, 50, 138);

//Dims the device with ID 12345 to 30% in 5 seconds
ZW_DimSetEx(12345, 30, 5);
```

## ZW_DimStop

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-dimstop/

`bool ZW_DimStop(int $InstanceID)`

stops dimming a Z-Wave device

**Parameters**

- `$InstanceID` (int): Device ID

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

Device ID

**Example**

```php
ZW_DimStop(12345);
```

## ZW_DimUp

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-dimup/

`bool ZW_DimUp(int $InstanceID)`

**Parameters**

- `$InstanceID` (int): ID of the device to be switched

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

ID of the device to be switched

**Example**

```php
//The device with ID 12345 starts to dim up
ZW_DimUp(12345);
```

## ZW_DimUpEx

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-dimupex/

`bool ZW_DimUpEx(int $InstanceID, int $Duration)`

starts dimming up within a runtime

**Parameters**

- `$InstanceID` (int): ID of the device to be switched
- `$Duration` (int): Runtime until dimming up completely (0..255) (see table)

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

Runtime until dimming up completely (0..255) (see table)

**Example**

```php
//The device with the ID 12345 starts to dim up over a runtime of 10 minutes
ZW_DimUpEx(12345, 138);

//The device with ID 12345 begins to dim up over a runtime of 5 seconds
ZW_DimUpEx(12345, 5);
```

## ZW_DoorLockOperation

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-doorlockoperation/

`bool ZW_DoorLockOperation(int $InstanceID, int $Mode)`

_Requires Symcon >= 4.1_

Sets the door lock operation mode of a Z-Wave device

**Parameters**

- `$InstanceID` (int): ID of the device to be switched
- `$Mode` (int): Mode to set the Z-Wave device to

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

Mode to set the Z-Wave device to

**Example**

```php
//e.g. Switches the door lock operation mode to unsecured with a timeout
ZW_DoorLockOperation(12345,1);
```

## ZW_LockMode

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-lockmode/

`bool ZW_LockMode(int $InstanceID, int $Value)`

**Parameters**

- `$InstanceID` (int): Device ID
- `$Value` (int): 0..255

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

0..255

**Example**

```php
ZW_LockMode(12345, 0);
```

## ZW_MeterReset

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-meterreset/

`bool ZW_MeterReset(int $InstanceID)`

**Parameters**

- `$InstanceID` (int): Device ID

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

Device ID

**Example**

```php
ZW_MeterReset(12345);
```

## ZW_Optimize

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-optimize/

`bool ZW_Optimize(int $InstanceID)`

_Requires Symcon >= 4.1_

Starts the wireless network optimization process for a Z-Wave device

**Parameters**

- `$InstanceID` (int): Device ID

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

Device ID

**Example**

```php
ZW_Optimize(12345);
```

## ZW_ProtectionSet

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-protectionset/

`bool ZW_ProtectionSet(int $InstanceID, int $Mode)`

**Parameters**

- `$InstanceID` (int): Device ID
- `$Mode` (int): 0..255

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

0..255

**Example**

```php
ZW_ProtectionSet(12345, 1);
```

## ZW_RequestStatus

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-requeststatus/

`bool ZW_RequestStatus(int $InstanceID)`

**Parameters**

- `$InstanceID` (int): ID of the device

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

ID of the device

**Example**

```php
ZW_RequestStatus(12345);
```

## ZW_ShutterMoveDown

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-shuttermovedown/

`bool ZW_ShutterMoveDown(int $InstanceID)`

**Parameters**

- `$InstanceID` (int): ID of the device to be switched

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

ID of the device to be switched

**Example**

```php
ZW_ShutterMoveDown(12345); //Move downwards
```

## ZW_ShutterMoveUp

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-shuttermoveup/

`bool ZW_ShutterMoveUp(int $InstanceID)`

**Parameters**

- `$InstanceID` (int): ID of the device to be switched

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

ID of the device to be switched

**Example**

```php
ZW_ShutterMoveUp(12345); //Move upwards
```

## ZW_ShutterStop

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-shutterstop/

`bool ZW_ShutterStop(int $InstanceID)`

**Parameters**

- `$InstanceID` (int): ID of the device to be switched

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

ID of the device to be switched

**Example**

```php
ZW_ShutterStop(12345); //Stop
```

## ZW_SwitchAllMode

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-switchallmode/

`bool ZW_SwitchAllMode(int $InstanceID, int $Mode)`

_Requires Symcon >= 4.1_

Sets the Switch All mode of a Z-Wave device

**Parameters**

- `$InstanceID` (int): ID of the device to be switched
- `$Mode` (int): Mode to set the Z-Wave device to

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

Mode to set the Z-Wave device to

**Example**

```php
//Mode is set to Only On
ZW_SwitchAllMode(12345, 2);
```

## ZW_SwitchMode

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-switchmode/

`bool ZW_SwitchMode(int $InstanceID, bool $Status)`

switches a Z-Wave device on/off

**Parameters**

- `$InstanceID` (int): ID of the device
- `$Status` (bool): __TRUE__ for on, __FALSE__ for Off

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

__TRUE__ for on, __FALSE__ for Off

**Example**

```php
ZW_SwitchMode(12345, true); //Turn on device
```

## ZW_Test

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-test/

`bool ZW_Test(int $InstanceID)`

_Requires Symcon >= 4.1_

Tests if a connection to a Z-Wave device is working

**Parameters**

- `$InstanceID` (int): Device ID

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

Device ID

**Example**

```php
ZW_Test(12345);
```

## ZW_ThermostatFanModeSet

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-thermostatfanmodeset/

`bool ZW_ThermostatFanModeSet(int $InstanceID, int $FanMode)`

Sets the FanMode for the thermostat

**Parameters**

- `$InstanceID` (int): Device ID
- `$FanMode` (int): 0..255

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

0..255

**Example**

```php
ZW_ThermostatFanModeSet(12345,1); //e.g. Switches the FanMode to OnLow
```

## ZW_ThermostatModeSet

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-thermostatmodeset/

`bool ZW_ThermostatModeSet(int $InstanceID, int $Mode)`

Sets the thermostat mode

**Parameters**

- `$InstanceID` (int): Device ID
- `$Mode` (int): 0..255

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

0..255

**Example**

```php
ZW_ThermostatModeSet(12345, 1); //e.g., Sets the mode to Heat
```

## ZW_ThermostatSetPointSet

Source: https://www.symcon.de/en/service/documentation/module-reference/devices/z-wave/zw-thermostatsetpointset/

`bool ZW_ThermostatSetPointSet(int $InstanceID, int $SetPoint, float $Value)`

Sets the PointSet Value

**Parameters**

- `$InstanceID` (int): Device ID
- `$SetPoint` (int): 0..255
- `$Value` (float): 0..255

**Returns** (bool): If the command succeeds, it returns __TRUE__, otherwise __FALSE__.

0..255

**Example**

```php
ZW_ThermostatSetPointSet(12345, 1, 20); //e.g. switch on
```