FS20 FHT´s unter RPI

Nabend!

So, nun habe ich auch endlich meine Konfiguration vernünftig übertragen bekommen und am laufen.
Allerdings scheint es noch Probleme mit den FS20 FHT´s zu geben, die ballern mir die ganze Zeit den Log voll mit utopischen Daten. Hier mal ein Auszug:


19:55:49 | 32846 | MESSAGE | VariableManager | [Ausbau\Studio\Raumregler\Position] = 0
19:55:49 | 18169 | MESSAGE | VariableManager | [Ausbau\Atelier\Raumregler\Position] = 0
19:55:49 | 34544 | MESSAGE | VariableManager | [Erdgeschoss\Schlafzimmer\Raumregler\Position] = 0
19:55:49 | 27470 | MESSAGE | VariableManager | [Obergeschoss\HWR\Raumregler\Position] = 0
19:55:49 | 53344 | MESSAGE | VariableManager | [Obergeschoss\Wohnzimmer\Raumregler\Position] = 0
19:55:49 | 49278 | MESSAGE | VariableManager | [Erdgeschoss\Bad\Raumregler\Position] = 0
19:55:49 | 33006 | MESSAGE | VariableManager | [Obergeschoss\Büro\Raumregler\Position] = 0
19:55:49 | 56093 | MESSAGE | VariableManager | [Erdgeschoss\Küche\Raumregler\Position] = 0
19:55:49 | 51198 | MESSAGE | VariableManager | [Obergeschoss\Bad\Raumregler\Position] = 0
19:55:55 | 32846 | MESSAGE | VariableManager | [Ausbau\Studio\Raumregler\Position] = 14.84375
19:55:55 | 18169 | MESSAGE | VariableManager | [Ausbau\Atelier\Raumregler\Position] = 14.84375
19:55:55 | 34544 | MESSAGE | VariableManager | [Erdgeschoss\Schlafzimmer\Raumregler\Position] = 14.84375
19:55:55 | 27470 | MESSAGE | VariableManager | [Obergeschoss\HWR\Raumregler\Position] = 14.84375
19:55:55 | 53344 | MESSAGE | VariableManager | [Obergeschoss\Wohnzimmer\Raumregler\Position] = 14.84375
19:55:55 | 49278 | MESSAGE | VariableManager | [Erdgeschoss\Bad\Raumregler\Position] = 14.84375
19:55:55 | 33006 | MESSAGE | VariableManager | [Obergeschoss\Büro\Raumregler\Position] = 14.84375
19:55:55 | 56093 | MESSAGE | VariableManager | [Erdgeschoss\Küche\Raumregler\Position] = 14.84375
19:55:55 | 51198 | MESSAGE | VariableManager | [Obergeschoss\Bad\Raumregler\Position] = 14.84375
19:56:17 | 32846 | MESSAGE | VariableManager | [Ausbau\Studio\Raumregler\Position] = 0
19:56:17 | 18169 | MESSAGE | VariableManager | [Ausbau\Atelier\Raumregler\Position] = 0
19:56:17 | 34544 | MESSAGE | VariableManager | [Erdgeschoss\Schlafzimmer\Raumregler\Position] = 0
19:56:17 | 27470 | MESSAGE | VariableManager | [Obergeschoss\HWR\Raumregler\Position] = 0
19:56:17 | 53344 | MESSAGE | VariableManager | [Obergeschoss\Wohnzimmer\Raumregler\Position] = 0
19:56:17 | 49278 | MESSAGE | VariableManager | [Erdgeschoss\Bad\Raumregler\Position] = 0
19:56:17 | 33006 | MESSAGE | VariableManager | [Obergeschoss\Büro\Raumregler\Position] = 0
19:56:17 | 56093 | MESSAGE | VariableManager | [Erdgeschoss\Küche\Raumregler\Position] = 0
19:56:17 | 51198 | MESSAGE | VariableManager | [Obergeschoss\Bad\Raumregler\Position] = 0
19:56:26 | 32846 | MESSAGE | VariableManager | [Ausbau\Studio\Raumregler\Position] = 8.59375
19:56:26 | 18169 | MESSAGE | VariableManager | [Ausbau\Atelier\Raumregler\Position] = 8.59375
19:56:26 | 34544 | MESSAGE | VariableManager | [Erdgeschoss\Schlafzimmer\Raumregler\Position] = 8.59375
19:56:26 | 27470 | MESSAGE | VariableManager | [Obergeschoss\HWR\Raumregler\Position] = 8.59375
19:56:26 | 53344 | MESSAGE | VariableManager | [Obergeschoss\Wohnzimmer\Raumregler\Position] = 8.59375
19:56:26 | 49278 | MESSAGE | VariableManager | [Erdgeschoss\Bad\Raumregler\Position] = 8.59375
19:56:26 | 33006 | MESSAGE | VariableManager | [Obergeschoss\Büro\Raumregler\Position] = 8.59375
19:56:26 | 56093 | MESSAGE | VariableManager | [Erdgeschoss\Küche\Raumregler\Position] = 8.59375
19:56:26 | 51198 | MESSAGE | VariableManager | [Obergeschoss\Bad\Raumregler\Position] = 8.59375
19:56:28 | 32846 | MESSAGE | VariableManager | [Ausbau\Studio\Raumregler\Position] = 0
19:56:28 | 18169 | MESSAGE | VariableManager | [Ausbau\Atelier\Raumregler\Position] = 0
19:56:28 | 34544 | MESSAGE | VariableManager | [Erdgeschoss\Schlafzimmer\Raumregler\Position] = 0
19:56:28 | 27470 | MESSAGE | VariableManager | [Obergeschoss\HWR\Raumregler\Position] = 0
19:56:28 | 53344 | MESSAGE | VariableManager | [Obergeschoss\Wohnzimmer\Raumregler\Position] = 0
19:56:28 | 49278 | MESSAGE | VariableManager | [Erdgeschoss\Bad\Raumregler\Position] = 0
19:56:28 | 33006 | MESSAGE | VariableManager | [Obergeschoss\Büro\Raumregler\Position] = 0
19:56:28 | 56093 | MESSAGE | VariableManager | [Erdgeschoss\Küche\Raumregler\Position] = 0
19:56:28 | 51198 | MESSAGE | VariableManager | [Obergeschoss\Bad\Raumregler\Position] = 0
19:56:29 | 32846 | MESSAGE | VariableManager | [Ausbau\Studio\Raumregler\Position] = 0
19:56:30 | 18169 | MESSAGE | VariableManager | [Ausbau\Atelier\Raumregler\Position] = 0
19:56:30 | 34544 | MESSAGE | VariableManager | [Erdgeschoss\Schlafzimmer\Raumregler\Position] = 0
19:56:30 | 27470 | MESSAGE | VariableManager | [Obergeschoss\HWR\Raumregler\Position] = 0
19:56:30 | 53344 | MESSAGE | VariableManager | [Obergeschoss\Wohnzimmer\Raumregler\Position] = 0
19:56:30 | 49278 | MESSAGE | VariableManager | [Erdgeschoss\Bad\Raumregler\Position] = 0
19:56:30 | 33006 | MESSAGE | VariableManager | [Obergeschoss\Büro\Raumregler\Position] = 0
19:56:30 | 56093 | MESSAGE | VariableManager | [Erdgeschoss\Küche\Raumregler\Position] = 0
19:56:30 | 51198 | MESSAGE | VariableManager | [Obergeschoss\Bad\Raumregler\Position] = 0
19:56:33 | 32846 | MESSAGE | VariableManager | [Ausbau\Studio\Raumregler\Position] = 0
19:56:33 | 18169 | MESSAGE | VariableManager | [Ausbau\Atelier\Raumregler\Position] = 0
19:56:33 | 34544 | MESSAGE | VariableManager | [Erdgeschoss\Schlafzimmer\Raumregler\Position] = 0
19:56:33 | 27470 | MESSAGE | VariableManager | [Obergeschoss\HWR\Raumregler\Position] = 0
19:56:33 | 53344 | MESSAGE | VariableManager | [Obergeschoss\Wohnzimmer\Raumregler\Position] = 0
19:56:33 | 49278 | MESSAGE | VariableManager | [Erdgeschoss\Bad\Raumregler\Position] = 0
19:56:33 | 33006 | MESSAGE | VariableManager | [Obergeschoss\Büro\Raumregler\Position] = 0
19:56:33 | 56093 | MESSAGE | VariableManager | [Erdgeschoss\Küche\Raumregler\Position] = 0
19:56:33 | 51198 | MESSAGE | VariableManager | [Obergeschoss\Bad\Raumregler\Position] = 0
19:56:34 | 32846 | MESSAGE | VariableManager | [Ausbau\Studio\Raumregler\Position] = 0
19:56:34 | 18169 | MESSAGE | VariableManager | [Ausbau\Atelier\Raumregler\Position] = 0
19:56:34 | 34544 | MESSAGE | VariableManager | [Erdgeschoss\Schlafzimmer\Raumregler\Position] = 0
19:56:34 | 27470 | MESSAGE | VariableManager | [Obergeschoss\HWR\Raumregler\Position] = 0
19:56:34 | 53344 | MESSAGE | VariableManager | [Obergeschoss\Wohnzimmer\Raumregler\Position] = 0
19:56:34 | 49278 | MESSAGE | VariableManager | [Erdgeschoss\Bad\Raumregler\Position] = 0
19:56:34 | 33006 | MESSAGE | VariableManager | [Obergeschoss\Büro\Raumregler\Position] = 0
19:56:34 | 56093 | MESSAGE | VariableManager | [Erdgeschoss\Küche\Raumregler\Position] = 0
19:56:34 | 51198 | MESSAGE | VariableManager | [Obergeschoss\Bad\Raumregler\Position] = 0
19:56:37 | 32846 | MESSAGE | VariableManager | [Ausbau\Studio\Raumregler\Position] = 0
19:56:37 | 18169 | MESSAGE | VariableManager | [Ausbau\Atelier\Raumregler\Position] = 0
19:56:37 | 34544 | MESSAGE | VariableManager | [Erdgeschoss\Schlafzimmer\Raumregler\Position] = 0
19:56:37 | 27470 | MESSAGE | VariableManager | [Obergeschoss\HWR\Raumregler\Position] = 0
19:56:37 | 53344 | MESSAGE | VariableManager | [Obergeschoss\Wohnzimmer\Raumregler\Position] = 0
19:56:37 | 49278 | MESSAGE | VariableManager | [Erdgeschoss\Bad\Raumregler\Position] = 0
19:56:37 | 33006 | MESSAGE | VariableManager | [Obergeschoss\Büro\Raumregler\Position] = 0
19:56:37 | 56093 | MESSAGE | VariableManager | [Erdgeschoss\Küche\Raumregler\Position] = 0
19:56:37 | 51198 | MESSAGE | VariableManager | [Obergeschoss\Bad\Raumregler\Position] = 0

Man sieht ganz gut die geringen Zeitlichen Abstände…ka wo er die Werte weg holt
Wollt´s nur melden, falls noch nicht bekannt.

Stimmen die Adressen bei dir bei den FHTs? Also sind diese korrekt in der Konfiguration drin?

paresy

Gerade kontrolliert, steht alles passend und richtig drin!

Die Werte bekommt er auch nicht wirklich über die FHZ, sonst würde die ja ständig blinken…echt merkwürdig!

Doofer Fehler. Fix im nächsten Update :slight_smile:

paresy

Sehr schön :slight_smile:

-Fix: FHT lauscht nur auf eingestellte Adresse

Getestet und für gut befunden! :wink:

Hallo,

bin gerade dabei mich in der RPI-Umgebung zurecht zu finden und Zug um Zug meine bestehende Landschaft zu migrieren.

Problem ist momentan, dass ich bei bei meinen 3 FHT’s keine Werte bekomme.
Die FHZ1300 scheint richtig angebunden zu sein, da die Werte der KS300 aktualisiert werden.

In den FHT-Instanzen sind die Adressen richtig eingetragen.
Müssen die FHT’s an der FHZ neu angelernt werden?

Gruß, burg

Ist es denn eine neue FHZ? Ansonsten sollte das einfach korrekt laufen.

paresy

Hallo paresy,

die FHZ1300 hatte ich Anfang 2008 gekauft.
Seither läuft die an einem Windows-PC mit IPS ohne Probleme.
Ich hatte die FHZ gestern testweise mal an den RPI angschlossen und wie gesagt, die KS300 wird einwandfrei empfangen, die FHT’s leider nicht.

Gruß, burg

Hallo @paresy,

habe mir eine aktuellere FHZ1300 PC besorgt.
Die ist max. 1 Jahr alt und funktioniert wie bereits beschrieben mit der KS300 aber nicht mit den FHT’s.

Schon eine Idee an was es liegen könnte?

Gruß, burg

Kann ich leider bestätigen, es kommen keine werte der FHTs an!

Wenigstens bin ich mit meinem Problem nicht alleine.
Dann muß ich die Tests für die Migration erst einmal auf Eis legen bis sich hier wieder etwas tut.

Gruß, burg

gibt es dazu vielleicht schon neue Erkenntnisse?

Gruß, burg

Auch mit der neuesten Versionsnummer keine Besserung.
Ebenso werden keine KS300 Werte empfangen ist mir aufgefallen, wohl aber die des HMS Systems…

Könnt ihr mir mit der aktuellen Version die Debug-Ausgaben zukommen lassen?

paresy

Hallo paresy,

habe gerade das Update laufen lassen.

Bei den FHT’s kommen noch keine Werte an.
Ein HMS 100 TF funktioniert (hatte ich bisher noch nicht getestet).
Beim KS300, der schon in einer der letzten Versionen funktioniert hat, tut sich jetzt nichts mehr.

Debug-Ergebnisse:
EG_WC_dump.txt (2.12 KB)
HMS100_TF_dump.txt (142 Bytes)

Gruß, burg

Muss mich korigieren:
KS300 funktioniert.
War wohl eine schlechte Position der FHZ1300.

Gruß, burg

FHT Problem im nächsten Update endlich gelöst.

paresy

@paresy:

Mit heutigem Update kommen die Werte incl. Fensterkontakt korrekt in IPS an.
Wie es mit dem Senden an die FHT’s aussieht muss ich noch testen.

Danke und Grüße,
burg

Ich kann bestätigen - die FHT’s sind online.
Danke