RFXtrx433 E --> Somfy --> Velux Dachfenster?

Hallo zusammen,

Ich bin gerade auf den RFXtrx433 E USB 433.92 MHz Transceiver gestossen. Das „neue Modell“ kennt nun anscheinend auch das Somfy RTS Protokoll.

Könnten so rein theoretisch auch die Velux Dachfenster Funk-Steuerungen via IPS angesteuert werden?

Gruss, Philipp

Ich habe jetzt seid neustem 2 Markisen mit Somfy RTS Ansteuerung.

Hat jetzt jemand schon Erfahrung mit dem neuen Transceiver und IPS? Würde mir nämlich das Ding leisten wollen.

Danke Pitti

PS: Siehe hier LINK

I know this is an old topic but as some people might come across this when searching for ‚somfy‘ (as I did), I figured I’d add my experience.

I control my Somfy shades from Symcon using an RFXcom transceiver. It works fine, I use RfxMgr (the ‚native‘ rfxcom software) to do the programming, and only up/down from Symcon. I wrote my own scripts to initialize and control the rfxcom; it’s not hard but a bit annoying because it’s cumbersome to work with binary data in PHP. I also use the rfxcom for reading cheap temperature and humidity sensors, and cheap PIR sensors, for which misssing a message every now and then is no problem. I can describe how I have it set up if anyone is interested; I haven’t made it into a proper Symcon plugin (yet) though - I don’t see the need yet really.

Also, another way of controlling RTS is by taking an RTS remote and soldering some wires onto the small push buttons inside. I have some Keytis remotes build into wall sockets so that I can control the shades from wall switches that fit with the other switches in the house, and not have to use the ugly Somfy wall switches.

Das hängt vom Dachfenster ab, die neueren nutzten auf alle Fälle ioHomeControl das funktioniert nicht mit RTS. Für ioHomeControl nutzte ich zur Ansteuerung eine umgebaute Velux Remote und einen Homematic Aktor HM-LC-Sw4-WM siehe auch Anleitung, oder statt einer umgebauten Remote ein KLF 050, so habe ich das bei den anderen Fenstern gelöst. Homematic lässt sich ja dann ganz normal aus IP Symcon ansteuern.

Sollte Somfy RTS gesteuert werden von IP Symcon wäre eine Alternative auch ein AIO Gateway, das kann auch Somfy RTS und lässt sich aus IP Symcon einfach über das AIO Gateway Modul ansteuern.

Hi,

also ich habe jetzt schon fast ein Jahr ein RFXtrx433E bei mir zusammen mit IPS im Einsatz und steuere damit meine 2 Markisen (Sompfy RTS) - funktioniert einwandfrei und fehlerfrei.

Habe mir die Ansteuerung aus den verschiedensten Foren (auch hier) zusammengesammelt. Kann man bestimmt besser und mit mehr Funktionsumfang machen. Im Winter wollte ich daraus auch mal ein Modul machen. Im Moment ist es ein ziemlich einfaches und fest verdrahtetes Script.

Ciao Pitti

PS: Siehe hier LINK

Gibt es den auch für einen Raspi? Wie hast du den RFXtrx433E bei dir in IPS eingebunden mittels USB?

Hängt schon immer bei mir am Raspi via USB! Mit den Treibern war das glaube ich etwas Tricky, aber seither läuft und läuft das Ding :slight_smile:

Gruß Heiko