Security Network Key

Hallo zusammen,

ich wollte ein wenig mit Openhab und Home Assistant spielen für einen Bekannten zum testen. Dazu auch mein Zwave Netz. Allerdings nehmen weder OH noch HA den Network Key, der in der settings.json steht. Muss dieser noch umgerechnet werden?

In welchem Format kann man denn dort den Key eingeben?

paresy

Also laut Dokumentation hat der Key dort 2 Stellen mehr. Also 34 anstatt 36

Network Security Key [security_networkkey]
This sets the network security key used in your network for securing communications using the secure command classes. It is a 16 byte value, specified in hexadecimal. The following formats -:

0011223344556677889900AABBCCDDEEFF
00 11 22 33 44 55 66 77 88 99 00 AA BB CC DD EE FF
00,11,22,33,44,55,66,77,88,99,00,AA,BB,CC,DD,EE,FF
0x00 0x11 0x22 0x33 0x44 0x55 0x66 0x77 0x88 0x99 0x00 0xAA 0xBB 0xCC 0xDD 0xEE 0xFF

Es sind genau 16 Bytes. Als sollte die Länge in HEX genau 32 sein. Dein Beispiel zeigt aber 17 Bytes…?
In IP-Symcon sollten es auch genau 32 in der Länge sein :slight_smile:

paresy