+ Antworten
Ergebnis 1 bis 8 von 8
  1. #1
    Registriert seit
    Nov 2017
    Beiträge
    11

    Thumbs up Enocean Pi Modul von Element 14 auch auf einem Arduino mit WIFI nutzbar.

    Hallo zusammen.

    Ich habe nach ein paar Tests herausgefunden dass man das Enocean Pi Modul von Element 14 auch auf einem Arduino mit WIFI nutzen kann z.b. ESP8266

    z.b als Gateway und diesen ganz easy in Symcon einsetzen kann.

    Braucht weniger strom und bootet sekunden schnell ohne OS

    GitHub - dparnell/esp8266-ser2net: An ESP8266 WiFi accessible serial port

    mit ein paar Anpassungen die ich noch posten werde funktioniert das https://www.symcon.de/forum/images/icons/icon14.png

  2. #2
    Registriert seit
    Nov 2016
    Ort
    Schwarzenbach/Saale
    Beiträge
    16

    Hi,

    gibt es dazu schon weitere Erkenntnisse?

    Markus
    ----------------------------------------------------------------
    LCN-Installation in progress mit LCN-WIH, 1-Wire, Arduino, MySensors, ESP8266, Hue, Roborock, Vorwerk VR200, Vitodens 300, Sonoff, Tasmota
    http://nachbelichtet.com

  3. #3
    Registriert seit
    Mar 2014
    Ort
    Mücke (Hessen)
    Beiträge
    953

    Würde mich auch Interessieren

    Gruß
    IPS v5.1 Unlimited auf Ubuntu Server | IPSView | EnOceanPi | Z-Wave (Razberry) | Sonos | Fritzbox 7390 | 1-Wire | DMX | Dali | Pokeys57E | Siemens Logo 8 | Siemens S7 | Wago SPS | KNX | Onkyo AVR | ModBus | HomeMatic@piVCCU | ESP8266 | MQTT | Ubiquiti | und noch viel mehr geplant

  4. #4
    Registriert seit
    Nov 2017
    Beiträge
    11

    Standard Enocean Gateway 1to1 Telegram to TCP over WiFi, inkl OTA and Wifi Manager


  5. #5
    Registriert seit
    Dec 2009
    Ort
    Salzburg
    Beiträge
    262

    Hallo,

    wollte deinen Code mal testen, bekomme aber einen Fehler :-(
    kenn mich mit dem Arduino noch nicht wirklich aus aber ev. sagt dir diese Fehlermeldung was

    Code:
    Arduino: 1.8.9 (Windows 10), Board: "Generic ESP8266 Module, 80 MHz, Flash, Disabled, ck, 26 MHz, 40MHz, DOUT (compatible), 512K (no SPIFFS), 2, v2 Lower Memory, Disabled, None, Only Sketch, 115200"
    
    In file included from C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:67:0,
    
                     from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:5:
    
    C:\Daten\Arduino\libraries\ESPBASE/global.h:9:1: error: 'Ticker' does not name a type
    
     Ticker tkSecond;              // Second - Timer for Updating Datetime Structure
    
     ^
    
    In file included from C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:68:0,
    
                     from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:5:
    
    C:\Daten\Arduino\libraries\ESPBASE/wifiTools.h: In function 'void ConfigureWifi()':
    
    C:\Daten\Arduino\libraries\ESPBASE/wifiTools.h:19:3: error: 'WiFi' was not declared in this scope
    
       WiFi.begin (config.ssid.c_str(), config.password.c_str());
    
       ^
    
    C:\Daten\Arduino\libraries\ESPBASE/wifiTools.h:21:27: error: 'WL_CONNECTED' was not declared in this scope
    
       while (WiFi.status() != WL_CONNECTED) {
    
                               ^
    
    C:\Daten\Arduino\libraries\ESPBASE/wifiTools.h:27:82: error: 'IPAddress' was not declared in this scope
    
         WiFi.config(IPAddress(config.IP[0], config.IP[1], config.IP[2], config.IP[3] ),  IPAddress(config.Gateway[0], config.Gateway[1], config.Gateway[2], config.Gateway[3] ) , IPAddress(config.Netmask[0], config.Netmask[1], config.Netmask[2], config.Netmask[3] ));
    
                                                                                      ^
    
    In file included from C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:68:0,
    
                     from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:5:
    
    C:\Daten\Arduino\libraries\ESPBASE/wifiTools.h: In function 'String GetMacAddress()':
    
    C:\Daten\Arduino\libraries\ESPBASE/wifiTools.h:35:3: error: 'WiFi' was not declared in this scope
    
       WiFi.macAddress(mac);
    
       ^
    
    C:\Daten\Arduino\libraries\ESPBASE/wifiTools.h: In function 'String GetAPMacAddress()':
    
    C:\Daten\Arduino\libraries\ESPBASE/wifiTools.h:43:3: error: 'WiFi' was not declared in this scope
    
       WiFi.softAPmacAddress(mac);
    
       ^
    
    In file included from C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:69:0,
    
                     from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:5:
    
    C:\Daten\Arduino\libraries\ESPBASE/NTP.h: At global scope:
    
    C:\Daten\Arduino\libraries\ESPBASE/NTP.h:14:1: error: 'WiFiUDP' does not name a type
    
     WiFiUDP UDPNTPClient;           // NTP Client
    
     ^
    
    C:\Daten\Arduino\libraries\ESPBASE/NTP.h: In function 'void getNTPtime()':
    
    C:\Daten\Arduino\libraries\ESPBASE/NTP.h:34:7: error: 'WiFi' was not declared in this scope
    
       if (WiFi.status() == WL_CONNECTED)
    
           ^
    
    C:\Daten\Arduino\libraries\ESPBASE/NTP.h:34:24: error: 'WL_CONNECTED' was not declared in this scope
    
       if (WiFi.status() == WL_CONNECTED)
    
                            ^
    
    C:\Daten\Arduino\libraries\ESPBASE/NTP.h:36:5: error: 'UDPNTPClient' was not declared in this scope
    
         UDPNTPClient.begin(2390);  // Port for NTP receive
    
         ^
    
    C:\Daten\Arduino\libraries\ESPBASE/NTP.h:37:5: error: 'IPAddress' was not declared in this scope
    
         IPAddress timeServerIP;
    
         ^
    
    C:\Daten\Arduino\libraries\ESPBASE/NTP.h:37:15: error: expected ';' before 'timeServerIP'
    
         IPAddress timeServerIP;
    
                   ^
    
    C:\Daten\Arduino\libraries\ESPBASE/NTP.h:38:51: error: 'timeServerIP' was not declared in this scope
    
         WiFi.hostByName(config.ntpServerName.c_str(), timeServerIP);
    
                                                       ^
    
    In file included from C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:76:0,
    
                     from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:5:
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NTPSettings.h: In function 'void send_NTP_configuration_html()':
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NTPSettings.h:76:7: error: 'server' was not declared in this scope
    
       if (server.args() > 0 )  // Save Settings
    
           ^
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NTPSettings.h:86:17: error: 'WriteConfig' was not declared in this scope
    
         WriteConfig();
    
                     ^
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NTPSettings.h:90:3: error: 'server' was not declared in this scope
    
       server.send_P ( 200, "text/html", PAGE_NTPConfiguration ); 
    
       ^
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NTPSettings.h: In function 'void send_NTP_configuration_values_html()':
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NTPSettings.h:105:3: error: 'server' was not declared in this scope
    
       server.send ( 200, "text/plain", values);
    
       ^
    
    In file included from C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:77:0,
    
                     from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:5:
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_Information.h: In function 'void send_information_values_html()':
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_Information.h:59:33: error: 'WiFi' was not declared in this scope
    
       values += "x_ssid|" + (String)WiFi.SSID() +  "|div\n";
    
                                     ^
    
    In file included from C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:77:0,
    
                     from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:5:
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_Information.h:64:3: error: 'server' was not declared in this scope
    
       server.send ( 200, "text/plain", values);
    
       ^
    
    In file included from C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:78:0,
    
                     from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:5:
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_General.h: In function 'void send_devicename_value_html()':
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_General.h:52:2: error: 'server' was not declared in this scope
    
      server.send ( 200, "text/plain", values);
    
      ^
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_General.h: In function 'void send_general_html()':
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_General.h:60:6: error: 'server' was not declared in this scope
    
      if (server.args() > 0 )  // Save Settings
    
          ^
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_General.h:67:15: error: 'WriteConfig' was not declared in this scope
    
       WriteConfig();
    
                   ^
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_General.h:70:2: error: 'server' was not declared in this scope
    
      server.send_P ( 200, "text/html", PAGE_AdminGeneralSettings ); 
    
      ^
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_General.h: In function 'void send_general_configuration_values_html()':
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_General.h:82:2: error: 'server' was not declared in this scope
    
      server.send ( 200, "text/plain", values);
    
      ^
    
    In file included from C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:79:0,
    
                     from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:5:
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NetworkConfiguration.h: In function 'void send_network_configuration_html()':
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NetworkConfiguration.h:91:6: error: 'server' was not declared in this scope
    
      if (server.args() > 0 )  // Save Settings
    
          ^
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NetworkConfiguration.h:113:15: error: 'WriteConfig' was not declared in this scope
    
       WriteConfig();
    
                   ^
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NetworkConfiguration.h: In function 'void send_network_configuration_values_html()':
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NetworkConfiguration.h:153:2: error: 'server' was not declared in this scope
    
      server.send ( 200, "text/plain", values);
    
      ^
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NetworkConfiguration.h: In function 'void send_connection_state_values_html()':
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NetworkConfiguration.h:168:6: error: 'WiFi' was not declared in this scope
    
      if (WiFi.status() == 0) state = "Idle";
    
          ^
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NetworkConfiguration.h:178:11: error: 'WiFi' was not declared in this scope
    
       int n = WiFi.scanNetworks();
    
               ^
    
    In file included from C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:79:0,
    
                     from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:5:
    
    C:\Daten\Arduino\libraries\ESPBASE/Page_NetworkConfiguration.h:219:2: error: 'server' was not declared in this scope
    
      server.send ( 200, "text/plain", values);
    
      ^
    
    In file included from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:5:0:
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h: In member function 'void ESPBASE::initialize()':
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:101:26: error: 'ReadConfig' was not declared in this scope
    
       CFG_saved = ReadConfig();
    
                              ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:110:7: error: 'WiFi' was not declared in this scope
    
           WiFi.mode(WIFI_OFF);
    
           ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:110:17: error: 'WIFI_OFF' was not declared in this scope
    
           WiFi.mode(WIFI_OFF);
    
                     ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:111:17: error: 'WIFI_STA' was not declared in this scope
    
           WiFi.mode(WIFI_STA);
    
                     ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:115:30: error: 'WL_CONNECTED' was not declared in this scope
    
           while((WiFi.status()!= WL_CONNECTED) and --timeoutClick > 0) {
    
                                  ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:120:26: error: 'WL_CONNECTED' was not declared in this scope
    
           if(WiFi.status()!= WL_CONNECTED )
    
                              ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:141:5: error: 'WiFi' was not declared in this scope
    
         WiFi.mode(WIFI_AP);
    
         ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:141:15: error: 'WIFI_AP' was not declared in this scope
    
         WiFi.mode(WIFI_AP);
    
                   ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h: In member function 'void ESPBASE::httpSetup()':
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:168:3: error: 'server' was not declared in this scope
    
       server.on ( "/", []() {
    
       ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h: In lambda function:
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:170:5: error: 'server' is not captured
    
         server.send_P ( 200, "text/html", PAGE_AdminMainPage);  // const char top of page
    
         ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h: In lambda function:
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:174:5: error: 'server' is not captured
    
         server.send( 200, "text/html", "" );
    
         ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h: In lambda function:
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:181:5: error: 'server' is not captured
    
         server.send_P ( 200, "text/html", PAGE_Information );
    
         ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h: In lambda function:
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:190:5: error: 'server' is not captured
    
         server.send_P ( 200, "text/plain", PAGE_Style_css );
    
         ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h: In lambda function:
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:194:5: error: 'server' is not captured
    
         server.send_P ( 200, "text/plain", PAGE_microajax_js );
    
         ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h: In lambda function:
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:205:5: error: 'server' is not captured
    
         server.send ( 400, "text/html", "Page not Found" );
    
         ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h: In member function 'void ESPBASE::OTASetup()':
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:216:7: error: 'ArduinoOTA' was not declared in this scope
    
           ArduinoOTA.onStart([]() { // what to do before OTA download insert code here
    
           ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:232:29: error: 'ota_error_t' has not been declared
    
           ArduinoOTA.onError([](ota_error_t error) {
    
                                 ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h: In lambda function:
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:234:24: error: 'OTA_AUTH_ERROR' was not declared in this scope
    
               if (error == OTA_AUTH_ERROR) Serial.println("Auth Failed");
    
                            ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:235:29: error: 'OTA_BEGIN_ERROR' was not declared in this scope
    
               else if (error == OTA_BEGIN_ERROR) Serial.println("Begin Failed");
    
                                 ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:236:29: error: 'OTA_CONNECT_ERROR' was not declared in this scope
    
               else if (error == OTA_CONNECT_ERROR) Serial.println("Connect Failed");
    
                                 ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:237:29: error: 'OTA_RECEIVE_ERROR' was not declared in this scope
    
               else if (error == OTA_RECEIVE_ERROR) Serial.println("Receive Failed");
    
                                 ^
    
    C:\Daten\Arduino\libraries\ESPBASE/ESPBASE.h:238:29: error: 'OTA_END_ERROR' was not declared in this scope
    
               else if (error == OTA_END_ERROR) Serial.println("End Failed");
    
                                 ^
    
    C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino: At global scope:
    
    GatewayEno2Wifi_OTA_wifimgr:30:1: error: 'WiFiServer' does not name a type
    
     WiFiServer server1(TCP_SER2NET_PORT);
    
     ^
    
    GatewayEno2Wifi_OTA_wifimgr:31:12: error: cannot declare variable 'client' to be of abstract type 'WiFiClient'
    
     WiFiClient client;
    
                ^
    
    In file included from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:6:0:
    
    C:\Daten\Arduino\libraries\WiFi\src/WiFiClient.h:27:7: note:   because the following virtual functions are pure within 'WiFiClient':
    
     class WiFiClient : public Client {
    
           ^
    
    In file included from C:\Daten\Arduino\libraries\WiFi\src/WiFiClient.h:24:0,
    
                     from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:6:
    
    C:\Daten\Arduino\portable\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266/Client.h:29:21: note: 	virtual int Client::connect(const IPAddress&, uint16_t)
    
             virtual int connect(CONST IPAddress& ip, uint16_t port) =0;
    
                         ^
    
    C:\Daten\Arduino\portable\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266/Client.h:37:22: note: 	virtual bool Client::flush(unsigned int)
    
             virtual bool flush(unsigned int maxWaitMs = 0) = 0;
    
                          ^
    
    C:\Daten\Arduino\portable\packages\esp8266\hardware\esp8266\2.5.0\cores\esp8266/Client.h:38:22: note: 	virtual bool Client::stop(unsigned int)
    
             virtual bool stop(unsigned int maxWaitMs = 0) = 0;
    
                          ^
    
    GatewayEno2Wifi_OTA_wifimgr:34:1: error: 'WiFiServer' does not name a type
    
     WiFiServer serverDiag(TCP_DIAG_PORT);
    
     ^
    
    GatewayEno2Wifi_OTA_wifimgr:35:12: error: cannot declare variable 'clientDiag' to be of abstract type 'WiFiClient'
    
     WiFiClient clientDiag;
    
                ^
    
    In file included from C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino:6:0:
    
    C:\Daten\Arduino\libraries\WiFi\src/WiFiClient.h:27:7: note:   since type 'WiFiClient' has pure virtual functions
    
     class WiFiClient : public Client {
    
           ^
    
    C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino: In function 'void setup()':
    
    GatewayEno2Wifi_OTA_wifimgr:102:2: error: 'server1' was not declared in this scope
    
      server1.begin();
    
      ^
    
    GatewayEno2Wifi_OTA_wifimgr:103:2: error: 'serverDiag' was not declared in this scope
    
      serverDiag.begin();
    
      ^
    
    C:\Daten\Arduino\portable\sketchbook\GatewayEno2Wifi_OTA_wifimgr\GatewayEno2Wifi_OTA_wifimgr.ino: In function 'void loop()':
    
    GatewayEno2Wifi_OTA_wifimgr:113:3: error: 'ArduinoOTA' was not declared in this scope
    
       ArduinoOTA.handle();
    
       ^
    
    GatewayEno2Wifi_OTA_wifimgr:116:3: error: 'server' was not declared in this scope
    
       server.handleClient();
    
       ^
    
    GatewayEno2Wifi_OTA_wifimgr:140:14: error: 'server1' was not declared in this scope
    
         client = server1.available();
    
                  ^
    
    GatewayEno2Wifi_OTA_wifimgr:163:18: error: 'serverDiag' was not declared in this scope
    
         clientDiag = serverDiag.available();
    
                      ^
    
    Multiple libraries were found for "WiFiClient.h"
     Used: C:\Daten\Arduino\libraries\WiFi
     Not used: C:\Daten\Arduino\portable\packages\esp8266\hardware\esp8266\2.5.0\libraries\ESP8266WiFi
    exit status 1
    'WiFiServer' does not name a type
    
    This report would have more information with
    "Show verbose output during compilation"
    option enabled in File -> Preferences.

  6. #6
    Registriert seit
    Nov 2017
    Beiträge
    11

    Hallo thka

    Benutzt du ArduinoIDE von arduino.cc?
    Leider Arbeite ich mit Atom.io mit dem Platformio plugin. Damit hatte ich bis jetzt keine Problemen mit den uploads. Wenn du noch 1-3 Tage zeit hast erstelle ich ein kleiner HowTo für Platformio und Teste es auch mal mit dem ArduinoIDE.
    Sorry das ich auf die schnelle keinen Lösungsvorschlag habe.

  7. #7
    Registriert seit
    Dec 2009
    Ort
    Salzburg
    Beiträge
    262

    Ja hab’s der ArduinoIDE versucht, wie gesagt bin da noch Anfänger...

  8. #8
    Registriert seit
    Nov 2017
    Beiträge
    11

    Hallo thka

    Check mal EnOcean_ESP8266_Gateway/Gateway at master · Techserv-krY/EnOcean_ESP8266_Gateway · GitHub

    unter Wiki habe ich neu 2 Anleitungen erstellt, hoffe ich konnte dir so weiterhelfen.

    Gruss Pete

Ähnliche Themen

  1. Disco mit einem esp8266 / Arduino
    Von drapple im Forum Projekt Showcase
    Antworten: 2
    Letzter Beitrag: 08.01.17, 11:50
  2. Arduino Uno mit einem enomTx Shield
    Von Stefan W im Forum Bastel-Ecke
    Antworten: 0
    Letzter Beitrag: 27.01.15, 22:42
  3. Antworten: 0
    Letzter Beitrag: 13.01.14, 22:18
  4. iRule auch mit IPS nutzbar?
    Von TheFurious im Forum Allgemeine Diskussion (2.x/3.x)
    Antworten: 0
    Letzter Beitrag: 20.09.12, 16:50
  5. Fritzbox USB auch übers Internet nutzbar ?
    Von roadsterhh im Forum Audio & Video, TK-Anlagen, ISDN
    Antworten: 9
    Letzter Beitrag: 26.04.12, 16:11