NRG-Stack Comet WiFi
Author: DG65
Comet WiFi integrates the Wi-Fi radiator thermostats from Eurotronic locally into Symcon. The thermostats talk exclusively to the Eurotronic cloud via MQTT; there is no local interface. The module therefore uses your own MQTT broker, which the devices reach through a DNS redirect (e.g. Pi-hole). With a bridge to the cloud, the manufacturer's app keeps working. The module does not set up the broker itself; the instructions are in the forum thread: https://community.symcon.de/t/144922
Five modules in one library: the configurator listens at the MQTT client and creates the thermostats it finds with one click, without sending anything itself. The thermostat represents one device. The overview tile shows all thermostats, the room tile shows one thermostat large and operable, and the room combines several thermostats into one instance.
Per thermostat: current and target temperature (setpoint in 0.5 degree steps), operating mode, key lock, display rotation, automatic daylight saving time, temperature offset, battery level with a warning threshold, Wi-Fi signal, reachability, weekly schedule and holiday (read in the form, change by script), device clock with deviation and adjustment, as well as model, firmware and IP address.
Important: the thermostats run on batteries. Active polling is off by default, the devices report on their own, and without polling the values can be many hours old. The protocol is undocumented; everything was measured on ten thermostats with the same firmware (Comet Wifi Ver. 6.1) and is only kept as a variable if it could be confirmed on the device. A setpoint is not permanent, because the weekly schedule in the device keeps running. The interface is bilingual (German/English). Testers are welcome in the forum thread.
Included Modules
- Comet WiFi Konfigurator
- NRG-Stack Comet WiFi Konfigurator
- Comet WiFi Configurator
- NRG-Stack Comet WiFi Configurator
- Comet WiFi Raum
- NRG-Stack Comet WiFi Raum
- Thermostatgruppe
- Comet WiFi Room
- NRG-Stack Comet WiFi Room
- Thermostat group
- Comet WiFi Raumkachel
- NRG-Stack Comet WiFi Raumkachel
- Thermostat einzeln
- Comet WiFi Room Tile
- NRG-Stack Comet WiFi Room Tile
- Single thermostat
- Comet WiFi
- Eurotronic Comet WiFi
- NRG-Stack Comet WiFi Thermostat
- Heizkörperthermostat
- Radiator thermostat
- Comet WiFi thermostat
- Comet WiFi Kachel
- NRG-Stack Comet WiFi Kachel
- Heizungsübersicht
- Comet WiFi Tile
- NRG-Stack Comet WiFi Tile
- Heating overview
Version History
- New: First release in the store. Connects the Eurotronic Comet WiFi thermostats through a local MQTT broker, with configurator, thermostat, overview tile, room tile and room.
- New: The module is bilingual (German/English). Form, messages, tiles and variable names follow the Symcon language.
- Note: A requirement is your own MQTT broker that the thermostats reach through a DNS redirect. The instructions are in the forum thread.