Information
Grafana Connect
Modul stellt Grafana alle geloggten Variablen zur Erstellung von Kurven zur Verfuegung ohne zwischen Datenbanken etc.
Sensibo
Steuerung und Anzeige einer ueber Sensibo angebundenen Klimaanlage in IPSymcon
IPSViewConnect
Authentication and optimized data transfer for IPSView
IPSViewDesigner
Designer for IPSView visualizations
Homematic Inventory Module
Creates an HTML overview of all Homematic devices of a CCU: every channel with address, device type, firmware and the matching Symcon instance, plus the radio levels of the Homematic radio devices to each interface of the CCU.
This helps to find weak radio links, to spot channels that are paired in the CCU but not set up in Symcon, and to detect duplicate instances.
Scope and sort order of the report are configurable; optionally, the list is also stored as JSON in a variable.
Pegelstand
Kleines Modul, welches den Pegelstand von Mess-Stationen von https://www.pegelonline.wsv.de/ ausliest und als Variablen anzeigt.
KNXSystemZeitgeber
Modul zur automatischen Übertragung von Zeit- und Datumswerten von IP-Symcon auf den KNX-Bus. Unterstützt werden sowohl getrennte Telegramme für Zeit (DPT 10.001) und Datum (DPT 11.001) als auch das kombinierte Datum-Zeit-Format (DPT 19.001).
Die Auslösung kann über frei definierbare Sendezeiten und/oder einen optionalen Intervallbetrieb erfolgen. Beide Methoden lassen sich parallel verwenden. Als Zeitquelle dient entweder die Symcon-Systemzeit oder optional ein NTP-Modul. Das Senden kann über die Konfiguration aktiviert oder deaktiviert werden.
Home Assistant
Integrates devices, entities, and services from the Home Assistant ecosystem into Symcon.
Imports existing elements from a Home Assistant installation or integrates compatible devices and services directly via MQTT Discovery — even entirely without a Home Assistant server. Both approaches can be used in parallel.
iCal-Calendar
Das Modul dient dem Einlesen von Kalenderdaten in IP-Symcon (getestet mit Google Calendar, ownCloud Calendar, Synology Calendar und iCloud). Zum einen können die eingebundenen Kalender auf einfache Weise im Webfront angezeigt werden, zum anderen können eingetragene Termine zum Setzen von Statusvariablen ausgewertet werden.
Damit ist es z.B. sehr einfach möglich einen zentralen Anwesenheitskalender im Internet zu pflegen, IP Symcon steuert damit automatisch Heizung, Alarmanlage und Anwesenheitssimulation.
Auch die Visualisierungen von Einträgen in öffentlichen Kalendern (z.B. Müllabfuhrtermine, Kinoprogramm, ...) im Webfront können ohne viel Skript-Programmierung realisiert werden. Z.B. können Abfuhrtermine immer bereits 1 Tag vorher angezeigt werden.
Matter Diagnose
Checks with one click why Matter devices will not pair or suddenly fall silent, especially with Matter over Thread. It checks the route into the Thread network, IPv6 and the border routers, and which paired devices actually announce themselves in the network, also towards Apple Home or Home Assistant. The result is a traffic-light list in plain language with meaning and remedy. As a watchdog the module repeats the check in the background and reports every change, such as a device that has disappeared. It changes nothing on the system, commands that need administrator rights are only offered for copying. Runs on Windows, Linux (including SymBox) and macOS.
Pado
Das Modul dient zum Empfangen von Geofencing Daten der iOS App "Pado". Damit ist es möglich, das Verlassen und Betreten von Orten in IP-Symcon zu registrieren.
PVBatteryEconomics
PVBatteryEconomics bewertet die Wirtschaftlichkeit eines Batteriespeichers anhand stündlicher Zählerdaten für Netzbezug und Einspeisung. Das Modul vergleicht Szenarien mit und ohne Speicher und berechnet Kosten, Ersparnis, Amortisation sowie Vollzyklen. Zusätzlich helfen tägliche und monatliche Debugwerte bei der Plausibilitätsprüfung und Analyse.
OpenCalendar
OpenCalendar verbindet lokale Kalender, Apple iCloud, CalDAV, Google Calendar, Microsoft 365/Outlook.com sowie ICS/Webcal mit Symcon. Termine und Aufgaben erscheinen in gemeinsamen Kalenderansichten für Kachelvisualisierung und IPSView. Nichtkommerzielle Nutzung gemäß PolyForm Noncommercial License 1.0.0.
OpenHomeAlarm
OpenHomeAlarm is a powerful alarm system for Symcon 9.x. The module monitors freely configurable security sensors and fault inputs, supports multiple alarm partitions and arming modes, and provides entry and exit delays.
It can be operated through a responsive Symcon tile or a fully interactive IPSView interface. Event logging, diagnostics, alarm escalation, configuration backup and restart-safe state handling make it suitable for flexible and reliable smart home security installations.
Bring!
Bring! Shopping List
GitHub Status
This module displays the current status of the GitHub services.
Variable Watchdog
Monitor variables for regular changes or updates.
Allow scripts to execute when a variable has not changed or has not been updated over a period of time.
Portainer
Module for connecting Portainer to Symcon
PRTG
Integration of PRTG devices and sensors in IPS.
In addition, a sensor with IPS runtime data for PRTG is supported.
Schulferien
Dieses Modul zeigt an, ob es sich heute um einen Ferientag handelt.
OpCache
Visualization of the PHP OpCache
Position Tracking
Allows live tracking of a vehicle within Google Maps. A Google Maps API key is required.
Sync (Dropbox)
Synchronizes all settings from IP-Symcon to Dropbox every hour. This enables a faster restore in the event of an error, since the backup can be imported directly (see https://www.symcon.de/en/service/documentation/backup-and-recovery/load-backup/)
Waste Calendar
Generic waste calendar, which can be provided with data for waste dates manually or by script.
Balboa Spa Control
Dieses Modul ermöglicht die Steuerung von Whirlpools mit einer verbauten Steuereinheit der Firma Balboa. Voraussetzung ist das bwa-WLAN-Modul. Die Steuerung erfolgt wahlweise lokal im eigenen Netzwerk (TCP-Port 4257, empfohlen, ohne Cloud-Konto) oder über die Balboa-Cloud (erfordert ein Konto der Spa Control-App). Einzelne Funktionen können sich je nach Modell und Ausstattung unterscheiden.
Zustand Fenster
Dieses Modul stellt den Zustand von Fenstern oder Türen, welche mit zwei Magnetkontakten ausgestattet sind, in IP-Symcon in einer Variable dar.
MrWash Flatrate
Modul zur automatischen Auswertung, ob sich die Mr. Wash Flatrate für dich lohnt – inklusive Webhook-Anbindung (z. B. Geofency), automatischer Programmerkennung (Außen vs. Innen+Außen), Break-Even-Berechnung, Fair-Use-Warnungen und Historie.
Tankerkoenig BestPrice
Tankerkoenig Best Price ist ein Erweiterungs-Modul für IPS2Tankerkoenig (Joey-1970). Es ermittelt aus deinen Tankstellen-Instanzen den günstigsten Preis für Diesel / E5 / E10 und stellt ihn übersichtlich als eigene Instanz bereit.
UniFi Talk
Integrates UniFi Talk on a UniFi OS Dream Machine into Symcon through a native Symcon WebSocket Client. The library provides modules for call monitoring, call history, device status, system status, and voicemail messages.
Countdown
The module makes it possible to display a countdown to an event in the Webfront.
Tibber
The Tibber Library provides 2 modules with which the "Tibber Query API" and the "Tibber Realtime API" can be queried.
Almanac
This module provides annual calendar information such as public holidays, school vacations and public holidays. In addition, information such as working days in the month, leap year, time of year or whether it is a weekend is kept up to date. You can also manage birthdays, wedding anniversaries and death anniversaries and receive daily information.
Waste Management
IP-Symcon module library for the visualisation of disposal dates.
The library uses various online services to integrate upcoming disposal dates (disposal calendar) into IPS.
Flight Radar
The module receives flight data from the ‘flights2mqtt’ service via MQTT and displays it clearly in TileVisu.
Local Tuya
LocalTuya is an integration that allows you to control Tuya devices (e.g. lights, robot vacuum cleaners, etc.) locally on your own network without requiring a connection to the Tuya Cloud.
Pollination
The module uses the pollen count risk index provided by the German Weather Service (DWD) (opendata.dwd.de) for graphical presentation and generates a brief daily notice for the corresponding risks based on all reports.
Stock Widget
Module for displaying stock prices in the Tile Visualization. Ideal for clear and concise overviews of financial and market data on dashboards.
User Map
The module offers the option of adding each Symcon user's own location marker to the user map directly from the console.
Weather Warning
This module is used to call up the severe weather warnings provided by the DWD (thunderstorms, heavy and continuous rain, snowfall, wind, fog, frost, black ice, thaw, UV radiation, heat).
Tractive GPS
Integration of the GPS trackers from Tractive.
Retrieve the available information such as state of charge, position etc. and trigger the functions they LiveTracking etc.
AdGuard Home
Integration of AdGuard Home in IP-Symcon
Config VersionControl
Backup the entire IPS configuration to a GIT repository. Optionally, the data is backed up.
Devolo Wifi-Adapter
Integration of the dLAN adapter with Wifi from Devolo.
Presentation of some information about dLAN, Wifi and the connected clients as well as control possibilities of the Wifi.
Husqvarna AutomowerConnect
Connection of a Husqvarna Automower with connect-module
Various operating data are queried and stored including the GPS coordinates (only with existing GPS module).
In addition, the basic control commands are available.
Hydrawise
Integration of the Hydrawise irrigation system from Hunter.
Information about all zones and sensors / measuring devices as well as an overview are displayed.
Manual control of zones is supported.
Icinga2
Mutual integration of IP-Symcon and Icinga
- Monitoring of IPS by Icinga (Check-Command)
- Forwarding Icinga-messages to IPS (Notification Command)
- Trigger Icinga-events in IPS (Event Command)
- Query information from Icinga from IPS (API-Interface)
Miele@Home
Connection of devices registered to Miele@home. Data are retrieved and stored, control of devices is also possible.
Linux-Server-Info
Retrieve operationg-system-informationen of linux-based systems
Sipgate-Client
This module uses the Sipgate API V2 and provides functions for the following items:
- Account balance
- Call up call history
- Send a SMS
- Retrieve and set the status of the forwarding
Solarwatt Energymanager
Reading out the data of a Solarwatt Energymanager - these are also displayed in the "Solarwatt Manager Portal"
Wiffi
Import of the data from the "do it yourself" sensor modules "Wiffi" from stall.biz.
Symcon Integrity-Check
Checking the integrity of the Symcon configuration
Listing of all inconsistencies (like missing objects, script etc) as error, warning or information respectively
Notices
The module is about controlling notices from users depending on their presence. There is also a possibility to send notifications repeatedly.
The package also includes support for simple logging with the possibility of displaying the following information
Symcon Script-Deployment
Provision/distribution of scripts for Symcon systems using packages/Git repositories.
Discovergy Smartmeter & OEMs
This module allows to retrieve data from Discovergy based smart meters and display it in Symcon. For electricity it supports ESY and EMH meters and for gas ELS.
Furthermore it is possible to calculate costs per kWh for electricity or m3 for gas. Smart energy suppliers like Tibber and aWATTar are supported.
Please see the forum entry for the setup.
GoDaddyDNS
Module updates a DNS (A) record in the GoDaddy DNS service.
DG65-Toolkit Battery Monitor
The Battery Monitor finds the batteries of your wireless devices by itself and tells you which ones need replacing soon, before a device fails.
• Finds battery values via variable profiles and typical identifiers (Z-Wave, Matter, Zigbee2MQTT, HomeMatic and more). Home storage systems and vehicle batteries are left out.
• Distinguishes a low battery from a device that no longer sends anything (radio silence) and marks doubtful values as "unknown".
• Forecast of the days remaining, shopping list with stock, replacement round by room, battery log.
• Notifications via push and email with reminders, quiet hours, weekly report and escalation for critical devices such as smoke detectors.
• Own tile for filtering, sorting and acknowledging.
• Rules for whole groups of devices instead of single entries.
• User interface in English and German, following the language of Symcon.
Zigbee2MQTT is connected according to its documentation but not yet tested with a real battery device. Feedback is welcome.
Free for private and non-commercial use.
NRG-Stack Börsenpreis
Börsenpreis fetches the day-ahead exchange prices for today and tomorrow per quarter hour, for Germany/Luxembourg or Austria - without an account and without a contract with a particular supplier. Sources: Energy-Charts (Fraunhofer ISE, default), EPEX Spot via ENTSO-E (free access key), the Tibber price overview by postal code, or aWATTar. It only fetches when prices are missing; your own scripts reach the curve through SPOT_GetPriceCurve.
Variables show the price now, whether it is negative and the next negative quarter hour - important for PV systems that receive no feed-in tariff during negative exchange prices (§ 51 EEG, Germany). For Symcon's Energy Manager the module provides the prices of the next 24 hours as a retail price: from your own tariff including grid fee (also § 14a module 3), levies and VAT, or as the Tibber price. Form and messages are available in German and English.
Licence: PolyForm Noncommercial 1.0.0 - free for private and non-commercial use; commercial use requires a separate licence from the rights holder.
NRG-Stack ChargerHub
Symcon module for wallboxes (EV charging stations) from several manufacturers via Modbus TCP, analogous to InverterHub (inverters) and MeterHub (energy meters). Bilingual (German and English).
The register mappings are based on the manufacturers' public Modbus documentation. Feedback on wrong or missing values is welcome, please include the wallbox type and the affected register.
NRG-Stack Dashboard
NRGDashboard ist die Darstellungsschicht des NRG-Stack: es zeigt, was die anderen NRG-Stack-Module (InverterHub, MeterHub, ChargerHub, OCPPHub, HeishaMon, WPHub, Prognose, EMS, Tibber, Börsenpreis, …) an Geräten und Werten liefern - als animierte Energiefluss-Kachel, als 3D-Karte, als Verlaufs-Charts und als Verbund-Gesundheitsübersicht.
Kein eigener Datenvertrag: jedes Gerät wird automatisch über die Verträge der Partnermodule gefunden. Fällt eine Instanz weg oder kommt neu dazu, zieht das Dashboard von selbst nach, ohne dass irgendwo eine Variable neu verknüpft werden müsste.
Sieben Module in einer Bibliothek:
NRGDashboardTile - Hauptkachel: kompletter Energiefluss (PV, Batterie, Netz, Hausverbrauch, Wallboxen, sonstige Verbraucher) als eine einzige, animierte Darstellung mit Klick-Details je Gerät.
NRGDashboardMap - dieselben Geräte als räumliche 3D-Karte, nach Kategorie geclustert.
NRGDashboardTopology - Gesundheitszustand aller installierten NRG-Stack-Module auf einen Blick, radial um das EMS gruppiert.
NRGDashboardPVMonitor - detaillierte Verlaufsansicht für PV, Batterie, Netz, Wallbox u. a., inklusive Börsenpreis-Überlagerung und Jahresvergleich.
NRGDashboardWPMonitor / NRGDashboardHeatSchema — Verlauf/Kennzahlen bzw. Prinzipschema einer Wärmepumpe.
NRGDashboardForecast - PV-/Lastprognose im Vergleich zu den tatsächlich gemessenen Werten.
Voraussetzungen: Symcon 9.0 oder neuer, mindestens ein NRG-Stack-Partnermodul mit *_GetFunctions-Vertrag (InverterHub, MeterHub, ChargerHub, OCPPHub, HeishaMon, WPHub, …) - ohne jede Quelle zeigt die Kachel nur einen Hinweis, keinen Fehler.
ESPHomeHub
ESPHomeHub connects ESPHome devices (ESP32, ESP8266 and others) directly to Symcon - through their own interface (Native API), encrypted, without an MQTT server and without Home Assistant. A configurator finds the devices on the network via mDNS and shows friendly name, address, MAC, ESPHome version, chip and whether a key is required; devices behind VLAN, VPN or Docker boundaries can be entered by address, and existing instances are recognised by their MAC even after an IP change. Every device describes itself: sensors, binary sensors, text sensors, switches, buttons, numbers, selects, texts, lights (brightness, color, color temperature), covers, valves, fans, locks, climate devices (with fan, swing, preset and humidity) and events become variables with a matching presentation without manual work, and can be operated from the visualization or via RequestAction; a variable only takes a value once the device confirms it. ESPHomeHub keeps the connection alive, reconnects by itself after an outage, reports a wrong key clearly as such and answers time requests of the devices with the time zone of Symcon including daylight saving time. A device can stay connected to Home Assistant at the same time. The user interface is available in English and German.
The protocol is checked against aioesphomeapi, the library used by Home Assistant, the encryption byte by byte. Testing on real ESP hardware is ongoing; feedback with chip and ESPHome version is very welcome. A module for the ESPHome Bluetooth proxy will follow.
ESPHome is a project of the Open Home Foundation; ESPHomeHub is not an official ESPHome project.
License: PolyForm Noncommercial 1.0.0 - private/non-commercial use is free, commercial use requires a separate license from the rights holder.
FrigateHub
FrigateHub connects Frigate to Symcon – the open-source video surveillance with AI detection of people, cars, animals and packages, without cloud. A configurator creates one instance per Frigate camera, plus optionally one for the Frigate server.
FrigateHub is also the way for cameras that are otherwise hard or impossible to integrate into Symcon: every camera with an RTSP stream – e.g. Mobotix, Axis, Hikvision, Dahua, Reolink, Instar, Foscam, Doorbird, Ubiquiti or no-name – becomes a Symcon camera with live video, recordings, archive and events via Frigate, without a manufacturer module. Pure cloud cameras without RTSP (e.g. Ring, Blink, Arlo, Nest) usually do not work.
Each camera provides motion, alert, detection, counters per object and zone, sounds, faces, license plates and Frigate's AI description, plus the image of the last detection. Detection, recording, snapshots, masks and zones can be switched from Symcon.
As a sensor it reports how long a car or package has been standing, whether someone is loitering in a zone, states such as gate open/closed, unknown faces and license plates, speed and daily counters. An image check detects covered or moved cameras.
Many Frigate settings can be changed directly in the instance form: retention, detected objects, alerts, objects and loitering time per zone, snapshots, license plate, face and sound detection. Frigate applies them immediately.
The camera is also a tile: live image or live video with sound (WebRTC), events with a clip of the whole period and the course per object as in Frigate, archive by day and playback from a time of day, control pad for PTZ cameras; also as a standalone page for IPSView.
The server instance shows version, storage and faulty cameras, switches Frigate profiles and is a tile with an overview of all cameras. Its recording watchdog reports when Frigate no longer records although it is "running" – e.g. when a USB disk disconnects.
Notifications on alert go to the tile visualization or WebFront and optionally by e-mail with camera image. FrigateHub optionally works together with the OpenHomeAlarm alarm system, including loitering, sabotage and faults as sensors.
Events arrive via MQTT through Symcon's MQTT server, images and archive via Frigate's HTTP API (port 5000, or 8971 with login; the password is not stored). Tested with Frigate 0.18.2. The module speaks English and German, following the language of the Symcon installation.
Frigate is an open-source project of Frigate, Inc.; FrigateHub is not an official Frigate project. License: PolyForm Noncommercial 1.0.0 – free for private use, commercial use only with a separate license.
NRG-Stack HeishaMon
IP-Symcon Modul zur Anbindung eines HeishaMon an eine Panasonic Aquarea Wärmepumpe über MQTT.
NRG-Stack InverterHub
Symcon module that reads and controls inverters from different manufacturers directly via Modbus TCP — one generic driver framework instead of one module per manufacturer.
The register assignments are based on the manufacturers' publicly available Modbus protocol documents and have been checked against real systems wherever possible. Feedback on wrong or missing values is welcome — please report manufacturer, model and the register concerned.
IRHub
IRHub brings infrared and RF remote controls to Symcon - locally in your home network via Broadlink devices, without a cloud: RM mini 3 (old and new firmware), RM pro/pro+, RM plus, RM4 mini/pro, RM4C, RM4S and RM5 plus. A configurator finds the devices by discovery or via entered IP addresses, even across VLAN and Docker boundaries, and clearly reports when a device is locked in the Broadlink app.
Remote controls learn the buttons of the original remote - infrared, and on the Pro models also RF (433/315 MHz) with frequency sweep or fixed frequency; every code can be tested before it is saved. Existing codes can be pasted (Broadlink Base64 as in Home Assistant, hex as in ioBroker, Pronto, pulse sequence), commands are unlimited and can be exported as CSV or JSON. Every remote control is also a tile with a keypad: power, volume and channel rockers, direction pad, number pad and scenes; buttons sort themselves by their name.
Air conditioners become a real device with power, mode, target temperature and fan, with their own thermostat-style tile and the room temperature for comparison. The codes come from a ready-made code table (332 models from the SmartIR project) or from a learning assistant; a single code of the unit is enough for IRHub to recognise the protocol and suggest matching code tables.
The RF capture (Pro models) logs received RF signals with date and time, recognises which signals belong to the same transmitter and turns an entry into a command with one click. Recognised signals can be used as triggers, e.g. for a wireless doorbell. Temperature and humidity of the RM pro and RM4 with cable sensor appear as variables.
The module is bilingual (English/German) and follows the language of Symcon.
Written from scratch, not a continuation of the older Broadlink module. The protocol is checked against the test data of the library used by Home Assistant, the RF capture was tried on a real Pro Broadlink; feedback with model and device ID is very welcome.
License: PolyForm Noncommercial 1.0.0. Private, non-commercial use is free; commercial use requires a separate license from the rights holder.
NRG-Stack MeterHub
NRG-Stack MeterHub reads energy meters from many manufacturers directly and makes power, import and feed-in available as ordinary Symcon variables — one shared driver framework instead of one module per vendor. Supported are, among others, Siemens SENTRON PAC2200, Janitza UMG, Eastron SDM, Carlo Gavazzi, Shelly Pro 3EM, go-e Controller, WhatWatt, Phoenix Contact and Meteocontrol blue'Log (via Modbus TCP, also through the Symbox gateway), as well as Inexogy/Discovergy through the cloud API.
It also includes a discovery that finds meters in your local network and creates them with one click, and virtual meters that calculate a new number from existing values, for example the remainder of a house connection. You switch archiving of the measured values on yourself; MeterHub helps with archive compaction and, for Inexogy, with backfilling the 15-minute load profile.
Part of the NRG-Stack. Feedback on wrong or missing values is welcome — please report the meter type and the register concerned.
Mittelwertberechnungen
IP-Symcon-Modul zur Berechnung gleitender Mittelwerte beliebiger Variablen — konfigurierbar über eine Liste von Kanälen, ganz ohne Abhängigkeit vom Archiv-System.
NRG-Stack ModbusServer
Macht IP-Symcon zum Modbus-TCP-Server (in älteren Datenblättern „Slave"). Externe Modbus-Clients („Master"), z. B. Leitsysteme, SCADA oder Energiemanagement, lesen und beschreiben damit frei gewählte Symcon-Variablen über eine Registertabelle.
Einsätze: Werte an Systeme weitergeben, die nur Modbus sprechen, Sollwerte von außen entgegennehmen, ein bekanntes Modbus-Gerät nachbilden oder einen vorhandenen Modbus-Server (Simulator, SPS) ablösen.
Funktionen:
- Function Codes 03, 04, 06, 16
- Datentypen uint16 bis float64, Word-Reihenfolge umschaltbar
- mehrere Clients gleichzeitig, mehrere Schnittstellen auf getrennten Ports
- Speicherzellen: geschriebene Werte bleiben erhalten
- Anzeige, wann ein Register zuletzt gelesen oder geschrieben wurde
- Statusanzeige mit Kommunikationsüberwachung
- Timeout-Absicherung mit Rückfallwert
- Vorlagen: Meteocontrol blue'Log RPC, SunSpec Wechselrichter und Zähler
Voraussetzung: IP-Symcon 9.0 oder neuer. Teil des NRG-Stack.
Strom gedacht Stromampel
StromGedacht (TransnetBW) — Netz-Signal: Wann ist es netzdienlich, Verbrauch zu verschieben? Abdeckung: Baden-Württemberg sowie Pilotgebiete (z. B. Teile Niedersachsens).
GrünstromIndex (Corrently/STROMDAO) — Öko-Signal: Wie grün ist der Strommix in der Region (0–100)? Abdeckung: ganz Deutschland, per Postleitzahl.
Energy-Charts Stromampel (Fraunhofer ISE) — Öko-Signal: Anteil erneuerbarer Energien an der Last, deutschlandweit.
NRG-Stack OCPPHub
OCPPHub connects wallboxes to Symcon through OCPP 1.6J: the wallbox connects to Symcon via WebSocket, and Symcon handles all message traffic itself - no external server, no additional process. A splitter instance accepts any number of wallboxes; with the configurator you create a charge point instance with measurements and control variables for each reported wallbox in one click. This lets you set the charge enable from your own automations or an energy management system, standalone PV surplus charging works even without an energy management system, and a central RFID customer management with consumption limits decides who may charge and when.
Reference/test hardware is the go-e Gemini/HOME+, verified live over several charging sessions. If a wallbox cannot do OCPP, the sibling module ChargerHub (Modbus TCP) is the right choice.
License: PolyForm Noncommercial 1.0.0 - private/non-commercial use is free, commercial use requires a separate license from the rights holder.
NRG-Stack Prognose
Forecast suite for Symcon. Load forecast (consumption, k-NN similar days with P10/P50/P90 and heat pump regression) and PV generation forecast (physics-based via Open-Meteo/Forecast.Solar/Solcast per generator, with self-calibration). Delivers JSON profiles for direct use by the EMS. The forecast tile in the NRG dashboard displays both forecasts.
NRG-Stack RLTHub
RLTHub connects ventilation systems (AHU/HRV) to Symcon via Modbus - local, without cloud and without a manufacturer account. It reads outdoor, supply and extract air temperature, the calculated heat recovery efficiency, the filter runtime or remaining time and the general fault, depending on the device also air quality and air flow. Modbus TCP plants run via RLTHub, RS485/Modbus RTU devices via RLTHubGateway and Symcon's ModBus gateway. RLTHubDiscovery finds Modbus TCP plants on the network. The NRG-Stack contract provides the values for scripts, dashboard and energy management. Read-only, no control.
Supported: Robatherm TrueControl (TCP), Pichler LG with ES2020 controller (TCP or RTU), Proxon FWT 2.0 (RTU). The FWT has been checked on a real plant (sub-zero temperatures open), Robatherm and Pichler not yet. Feedback is welcome.
License: PolyForm Noncommercial 1.0.0 - free for private use, commercial use only with a license from the rights holder.
RoboHub
RoboHub connects robot vacuums, mops and lawn mowers to Symcon, built vendor-neutral. Supported are Dreame, MOVA, Roborock, Ecovacs, Eufy (vacuums), Kärcher, Vorwerk Kobold, Miele Scout, iRobot and Narwal, plus the mowers of Worx/Kress/LandXcape/Ferrex, Husqvarna, GARDENA, STIHL, Bosch Indego, Segway Navimow, AL-KO and the Eufy E15. iRobot, Narwal and the Eufy E15 run locally in your home network, the others via the vendor cloud or its official API. One configurator finds the robots of all accounts and creates them with one click.
Every robot reports state, battery and, where the vendor provides them, consumables, errors and statistics. It accepts commands: start, pause, return to base, locate, and depending on the vendor single rooms or mowing zones. The tile shows state and controls, for Dreame/MOVA also the map with rooms and the driven path. For IPSView the same view is available as a separate page; control there only after enabling it and with a secret key. Passwords are only used to sign in and are not stored; where a vendor does not allow this, the exception and its reason are shown in the form.
Tested live with Dreame Aqua10 Ultra Roller Complete, MOVA LiDAX Ultra 1000 and iRobot Roomba 980, for Worx Landroid sign-in and state; testers for the other vendors are welcome.
The module is bilingual (English/German) and follows the language of Symcon.
License: PolyForm Noncommercial 1.0.0. Private, non-commercial use is free; commercial use requires a separate license from the rights holder.
NRG-Stack SamsungEhs
SamsungEhs reads a Samsung EHS heat pump directly via the internal NASA bus (RS485, F1/F2 connection) - without internet, without a manufacturer account and without Samsung's official Modbus accessory module MIM-B19N. A simple RS485-to-Ethernet adapter is enough. Fourth building block of the heat pump line in the NRG-Stack, next to WPHub (manufacturer clouds), HeishaMon (local, Panasonic) and WPModbusHub (local via Modbus).
The module does not query anything actively: in every update it listens for an adjustable time window on the bus that is running anyway. It reads outdoor temperature, flow/return temperature, hot water actual/setpoint and the flow setpoints of up to two heating zones. Through the same contract as WPHub/HeishaMon the values are available across the whole NRG-Stack.
Read-only by design. The message numbers are confirmed on real systems by testers, packet format and checksum were checked against an independent reference. The module never switches on archive logging by itself, there is a button in the form for that. The interface is bilingual (German/English).
NRG-Stack Tessie
Connects Tesla vehicles to Symcon through the Tessie API – control via REST and live telemetry via WebSocket, with a tile visualization, location detection (geofence) and If-Then automations. Bilingual (German/English). Unofficial community module, not from Tesla or Tessie.
NRG-Stack Tibber Grid Rewards
Shows when Tibber itself controls your vehicle or home battery (Grid Rewards) and provides this as variables in Symcon. The core is the “Grid Reward active” signal, which you can use to trigger your own automations or an energy management system. It also provides the mode (normal, car charging, charging from the grid, curtailment), the reward earned, the wallbox power and the energy shifted during an event.
Optional and independent of Grid Rewards: the complete Tibber end-customer price curve (including time-variable grid fees) via your own access token for the official Tibber API, a breakdown of the price into exchange price, procurement, grid fee and taxes for checking your invoice, and setting departure time and charge target directly in Tibber’s smart charging.
A tile of its own shows the status in the visualization, optionally with a rule editor (“If → Then”) and simulation buttons. Every section of the form can be expanded, collapsed, hidden and reordered.
The module is bilingual (English/German) and follows the language of Symcon.
Requirement: a Tibber contract and participation in Grid Rewards with a supported device. Complements the “Tibber V.2” module, which covers consumption and live measurement.
License: PolyForm Noncommercial 1.0.0. Private, non-commercial use is free; commercial use requires a separate license from the rights holder.
WarnHub
Bundles official warning and alert messages for Germany, Austria and Switzerland (NINA/DWD/GeoSphere Austria/Alertswiss/BAFU/Meteoalarm and more) and optionally your own weather station, filtered by a geometric radius check around your own, also mobile, locations. Push notifications to WebFront, tile visualization, Telegram, Pushover, e-mail and Notification Control, with optional protective actions (external blinds, awnings, garage doors, windows, ventilation and more), ready-made tiles and a warning history. Form and messages in German or English; official warnings stay in the language of their source.
NRG-Stack WPBsbLan
WPBsbLan reads a heating system or heat pump via a local BSB-LAN adapter (ESP32, github.com/fredlcore/bsb_lan) – no internet and no manufacturer account needed. BSB-LAN translates the Siemens heating bus (BSB/LPB/PPS) of many manufacturers (Atlantic, Brötje, Elco, Fujitsu Waterstage and others with Siemens RVS/LMU controllers) into a local HTTP/JSON interface.
It reads outdoor temperature, flow/return temperature, hot water actual/target and the operating mode of heating circuit 1 and cooling circuit 1 (BSB-LAN delivers the plain-text name itself). Read-only by design, no control commands.
Unlike Modbus integrations there is no fixed register list per manufacturer – BSB-LAN parameter numbers are individual for each installation. You enter the numbers needed yourself in the form, pre-filled with values confirmed on a real Fujitsu Waterstage (Siemens RVS21.831/127) as a starting point.
The module never switches on archive logging by itself, there is a button in the form for that. The interface is bilingual (German/English). It provides the NRG-Stack heat pump contract (Type=heatpump) – family modules such as the Dashboard recognize the values automatically.
NRG-Stack WPHub
WPHub connects heat pumps to Symcon through their manufacturer's cloud. Supported are Panasonic Comfort Cloud (Aquarea heat pumps) and Vaillant myVAILLANT (aroTHERM). You sign in the same way as in the manufacturer's app; the password is only needed for the one-time sign-in and is discarded afterwards, only the access key is kept.
For each heat pump the module provides reachability, operating state, outdoor, flow and hot water temperature, heating circuits with actual and setpoint values and, where the manufacturer reports them, daily energy, errors and special modes (Panasonic: quiet mode, powerful mode, holiday timer, emergency modes, with controls). Vaillant is read-only by design. For energy management and visualization WPHub offers the heat pumps in a common format; per device you can choose whether WPHub or another module (e.g. HeishaMon) controls the heat pump. The module enables archive logging only when you press a button.
Panasonic is tested on a real account, Vaillant on two systems of testers (controllers tli and vrc700). Accounts with two-factor sign-in (Panasonic) are not supported yet. More manufacturers are welcome as soon as testers with matching hardware are found.
The module is bilingual (German/English) and follows the language of Symcon.
License: PolyForm Noncommercial 1.0.0. Private, non-commercial use is free; commercial use requires a separate license from the rights holder.
NRG-Stack WPModbusHub
WPModbusHub connects Symcon directly to a heat pump on the local network via Modbus - no internet and no manufacturer account needed. Third building block of the heat pump line in the NRG-Stack, next to WPHub (manufacturer clouds) and HeishaMon (local, Panasonic only).
Supported manufacturers: NIBE (S series), Stiebel Eltron (ISG gateway, heat pumps with WPM and integral ventilation units LWZ/LWA), LG Therma V, Samsung EHS (via the MIM-B19N Modbus accessory module), Waterkotte (EcoTouch), IDM (Navigator control 2.0) and Proxon T300. One instance is one heat pump, a manufacturer selection switches the matching register profile.
It reads outdoor temperature, flow/return temperature and, depending on the model, hot water, buffer and heating circuit values. For Stiebel Eltron it adds source temperature, heat energy and electricity consumption (totals in kWh, the ISG's own estimate), operating mode and, on the LWZ, compressor starts. Through the same contract as WPHub/HeishaMon the values are available across the whole NRG-Stack automatically.
Two modules in one library: WPModbusHub opens the TCP connection itself, WPModbusHubGateway is a child instance of the Symcon ModBus Gateway (Client Socket or Serial Port, so RS485/RTU works too) and uses the same register profiles.
Important: so far IDM and the four registers of the Proxon T300 are confirmed on a real system, for Stiebel Eltron the addressing and the measured values of a WPF 15. For the other manufacturers the form shows a separate confidence note. Read-only by default: only the two room setpoints (comfort and ECO temperature of heating circuit 1) of Stiebel Eltron heat pumps can be changed, and only after you confirm a notice in the form (WPModbusHub only, not yet tested on real hardware). The module never switches on archive logging by itself, there is a button in the form for that. The interface is bilingual (German/English). Testers are welcome in the forum thread.
Cloudflare DNS
Das Modul implementiert einen eigenen DYN-DNS Dienst mit Hilfe des Cloudflare DNS-Services. Hierfür ruft das Modul selbständig die aktuelle IPv4 oder IPv6 Adresse des Servers (bzw. die Adresse des DSL-Anschlusses ab. Bei einer Änderung der Adresse wird automatisch der DNS-Eintrag auf die aktuelle IP angepasst. Der DNS-Dienst von Cloudflare ist kostenlos. Man muss jedoch im Besitz einer Domain sein und die Möglichkeit haben, die Nameserver-Einträge auf die Claudflare DNS-Server umzuleiten (Dies wird nicht von allen Anbietern unterstützt)
openHASP
Das Modul verbindet sich mit einem openHASP Display via MQTT. In der Instanz kann das Display konfiguriert werden und die UI-Elemente mit Variablen und Skripten verknüpft werden.
Pushover
Das Modul unterstützt das Versenden von Pushover Notifications. Des weiteren unterstützt das Modul die Aktualisierung der Pushover Glances welche z.B. auf der Apple Watch angezeigt werden.
SMS
Supports sending and receiving SMS with a Teltonika router as SMS gateway
Synology
Das Modul liest Parameter aus einem Synology NAS aus.
The Things Network
Das Modul verbindet das The Things Network mit IP-Symcon. Hierfür wird die HTTP-Integration genutzt
Floorplan
Floorplan ist ein grafischer Grundriss-Editor
Grundrisse können direkt in der Visualisierung erstellt und bearbeitet werden. Geräte und IP-Symcon-Variablen lassen sich anschließend direkt im Grundriss anzeigen und – sofern die Variable eine Aktion unterstützt – bedienen.
Die Bedienung orientiert sich an Easy Floorplan, wurde jedoch speziell für die Verwendung innerhalb von IP-Symcon umgesetzt.
AirVisual
The module lets you read values from AirVisual and display the map in IP-Symcon
HTML Email
Sends HTML emails from IP-Symcon via PHPMailer and SMTP with script support, attachments, CC/BCC, and a demo test mail.
Weatherstation
The module displays data from a Sainlogic / Froggit / ELV weather station in Symcon.
Hardware Monitor
Dieses Modul greift die JSON-Daten des Libre Hardware Monitor ab und stellt ausgewählte Sensorwerte als Variablen in IP-Symcon bereit.
Die Sensoren werden automatisch ausgelesen und können komfortabel über Checkboxen im Konfigurationsformular ausgewählt werden.
Jeder aktivierte Sensor erzeugt vier Variablen in IP-Symcon:
Pfad, Minimum, Istwert, Maximum.
IOTLinkService
This module connects the IOTLink service (https://gitlab.com/iotlink/iotlink) with IP-Symcon. With the module it is possible to get system information of a Windows computer via MQTT and to control it remotely.
MQTTSync
This module makes it possible to push data from IP-Symcon to MQTT or to execute scripts in IP-Symcon over MQTT.
OctoPrint
This module connects to OctoPrint via websockets.
Anel
This module connects the Anel products with IP-Symcon.
Balboa Spa
With this module it is possible to use Balboa Spa control via IP-Symcon.
COVID-19
This module shows the corona statistics for districts and provinces in IP-Symcon.
DeviceMonitor
With this module it is possible to monitor devices in the network.
HolzpelletsPreis
The module gets the current price per ton from Heizpellets24.de.
InLine SmartHome
This IP-Symcon module integrates the SmartHome devices from InLine into IP-Symcon using the Tasmota firmware.
openWB
Connects the openWB with IP-Symcon.
Philips HUE
Connects the HUE Bridge to IP-Symcon.
Philips HUE V2
Connects the HUE Bridge to IP-Symcon.
Pi-hole
With this module it is possible to monitor and control Pi-hole.
Playstation 4
Control a Playstation 4 via IP-Symcon
SmartAndRelax - LAY-Z-SPA
SmartAndRelax - LAY-Z-SPA
Tvheadend
With this module it is possible to monitor a Tvheadend Server in IPS.
Volumio
Connects Volumio via MQTT with IP Symcon.
WLANThermo
This module connects WLANThermo to IP-Symcon.
Zigbee2MQTT
Interface to connect Zigbee2MQTT (www.zigbee2mqtt.io) to IP-Symcon.
TFA Gateway
Mit diesem Modul könnt ihr relativ günstig Diverse Wetterinformationen in euer IPS System bekommen. Von der Firma TFA Dostmann gibt es diverse Wettersensoren, welche über ein Gateway normalerweise die Daten in die TFA eigene Cloud senden. Über die Proxy Einstellungen könnt ihr die Daten direkt an IPS leiten, die dann von diesem Modul verarbeitet werden. Somit habt ihr alle von euren Sensoren verfügbaren Werte direkt im IPS zur Verfügung.
Traccar
IP-Symcon module for integrating the Traccar GPS tracking system.
The module allows connecting a Traccar server to IP-Symcon and provides vehicle and device data such as position, speed, status, and additional telemetry information.
Pontos Base V2
the new module V2 for Pontos Base allows to query and control the hansgrohe Pontosbase from Symcon, so you can change profiles, delete alarms, close/open valves, and much more.
Tibber V.2
Die Tibber V.2 Library stellt 2 Module zur Verfügung mit denen die "Tibber Query API" und die "Tibber Realtime API" abgefragt werden können
.
Die Version 2. der Tibber API wurde notwendig, da einige Techniken nur noch ab Symcon 7.1 und PHP 8 zur Verfügung stehen.
Das Tibber_Query Modul enthält eine anpassbare Preisvorschau für die neue Kachelvisualierung
Meinen Dank geht an da8ter für seine Kachelsammlung!
Pontos Base
Module to receive Date from Watermanamementsystem from hansgrohe Pontos Base
Renault Z.E.
Connects to Renault Server and fetches vehicle data for Renault Zoe, Twingo and Dacia Spring. It creates certain variables such as battery status, remaining range, charging status and much more and allows to start the pre-conditioning.
Chanify
Das Modul ermöglicht das Senden von Benachrichtigungen via Chanify.
Gotify
Das Modul ermöglicht das Senden von Benachrichtigungen via Gotify.
Ntfy
Das Modul ermöglicht das Senden von Benachrichtigungen via Ntfy.
Regenradar
Ein modernes HTML-Visualisierungsmodul, das Wetterdaten aus OpenWeather OneCall und der eigenen Wetterstation mit einem animierten Regenradar kombiniert.
Voraussetzung für die Wettervorhersage ist ein installiertes und konfiguriertes OpenWeatherOneCall Modul.
Apple TV
With this module it is possible to integrate an Apple TV using the NodeJS tool (https://github.com/sebbo2002/atv2mqtt) via MQTT in IP-Symcon.
ArchivdatenAnomalien
The module can detect anomalies in the archive. The anomalies are displayed in a list and can be removed directly. In addition, the module creates a report with all the values that have been deleted.
Energy calculator
This Symcon module enables calculation of total consumption costs over several periods with different working prices.
Fully Kiosk Browser
With this module it is possible to control Android tablets remotely with the help of the Fully Kiosk Browser app.
Legrand Home Control
This ip-symcon module connects the legrand cloud with ip-symcon.
Mammotion
Controls Mammotion robotic mowers (LUBA and YUKA) via the official Mammotion Open API and displays their status in IP-Symcon.
Netatmo Energy
This ip-symcon module connects the netatmo energy cloud with ip-symcon.
Sankey
This module allows you to create a Sankey diagram in Symcon.
ShellyBLU
With this module it is possible to integrate Shelly's Bluetooth devices into IP-Symcon.
Shelly Gen2+
This module includes all devices from Gen2.
Zigbee2Tasmota
This module integrates the Tasmota Zigbee Bridge in IP-Symcon.
OwnTracks
Integration and visualization of Owntracks. Integration of external trackers such as Pado, EgiGeoZone, Geofency or MQTT-compatible trackers.
Regions can be monitored (geofencing) as well as permanently documenting positions. These positions may be shown as live-tracking in a map. Which data is sent from the mobile device is set in the OwnTracks app. Compliance with the applicable data protection regulations must be ensured by the user of this module.
Smartcar
Dieses Modul ermöglicht es, Fahrzeugdaten über die Smartcar-Plattform in IP-Symcon zu empfangen bzw. abzufragen und unterstützte Fahrzeugfunktionen zu steuern.
Die verfügbaren Datenpunkte und Steuerfunktionen werden über Smartcar → Configuration → Vehicle Access festgelegt.
Die tatsächlich vom Fahrzeug gelieferten Signale werden von der Fahrzeuginstanz automatisch erkannt und können anschließend im Konfigurationsformular einzeln aktiviert oder deaktiviert werden.
Smartcar unterstützt eine Vielzahl verschiedener Fahrzeugmarken.
Weitere Informationen zur Fahrzeugunterstützung findest du hier:
👉 Kompatible Fahrzeuge bei Smartcar
Wichtig: Beim Installieren des Moduls in Symcon muss zuerst ein Smartcar Configurator erstellt werden. Alle anderen Instanzen werden automatisch erstellt.
Wordclock
Dieses Modul integriert eine Wordclock LED-Uhr über MQTT in IP-Symcon.
Es wertet den Status der Uhr aus, stellt komfortable Steuervariablen bereit (Helligkeit, Farbe, Effekte) und sendet Änderungen automatisch über MQTT zurück an die Uhr.
Beim Anlegen der Instanz wird ebenfalls eine MQTT-Server Instanz angelegt, wenn noch keine besteht. Diese und der entsprechende Server Socket sind ebenfalls zu konfigurieren, entsprechend der Wordclock MQTT-Konfiguration.
Die Wordclock muss danach allenfalls neu gestartet werden.
YAVR
Steuerung von YAVR