« Back to Product



Require: IP-Symcon >= 6.0

The SMNP module reads all available OIDs of a device and represents any of them as variables in IP-Symcon. These are updated cyclically and can also be written to if required. Support for OIDLib files gives the OIDs more information/context to simplify setup.

feature scope

  • Automatic walk of all OIDs of a device
  • Creating individual OIDs as variables
  • Writing values to the OIDs
  • Additional information if OIDLib files are available
  • SNMPv1/SNMPv2/SNMPv3 incl. authentication and encryption are supported


  • Install the 'SMNP' module via the Module Store.

instance setup in IP-Symcon

Under 'Add Instance' the 'SMNP' module can be found using the quick filter.

Configuration page

name description
host address of host
Version Select between SNMPv1, SNMPv2, SNMPv3
Start at OID where the walk should start
User Username
Community Required for SNMPv1, SNMPv2
Enable Authentication Enable authentication option
Authentication Password Password for authentication
Authentication Type Select the authentication type: MD5, SHA1, SHA224, SHA256, SHA384, SHA512
Enable encryption Enable encryption
Encryption password Password for encryption
Encryption type Selection for encryption type: DES, AES128, 3DES, AES192, AES256, AES192blue, AES256blue
Show only known OIDs from the OIDLibs If enabled, only OIDs are shown that are available in the OIDLibs
OIDLibs List of files which provides the OIDs with description and name. The following tool can be used to convert MIB files to OIDLib files: MIB files to OIDLibs
Update interval Interval in seconds, in which time interval the values are updated
name description
Start Walk / Stop Walk Button to start and stop the walk
OID Display of the OID
Name Name given by the OIDLib
Description Description given by the OIDLib
Value Value of the OID given at the time of the walk
Active? Creates a variable for the selected OID
Writeable? Enables writing for the selected OID
Any questions?